Project 3 TLI-31300

/*
 Casey Fulford Biometrics TLI 31300
 Project 3 - Bar Graph with Potentiometer 
 For this I used a fingerprint scanner to turn on the light program
 Need to register fingerprints with the Adafruit Enroll program 
  
 */

#include <Adafruit_Fingerprint.h>
#include <SoftwareSerial.h>

SoftwareSerial mySerial(2, 3);
Adafruit_Fingerprint finger = Adafruit_Fingerprint(&mySerial);

int fingerprintID = 0;   // Set this to 0 for a place holder 

int getFingerprintIDez();  // Function declaraton. This calls the get.finger object from the Adafruit library 
const int potPin = A0; // Analog input pin connected to the potentiometer
int potValue = 0; // Value that will be read from the potentiometer
const int ledCount = 9;
int ledPins[] = {2,3,4,5,6,7,8,9,10};
boolean mainUser;  // This is a true / false for showing the main user 


void setup()  
{
  for (int thisLed = 0; thisLed < ledCount; thisLed++) 
  {
    pinMode(ledPins[thisLed], OUTPUT); // Set the LED pins as output
  }
  Serial.begin(9600);
  while (!Serial);  // For Yun/Leo/Micro/Zero/...
  delay(100);
  Serial.println("\n\nAdafruit finger detect test");

  // set the data rate for the sensor serial port
  finger.begin(57600);
  
  if (finger.verifyPassword()) {
    Serial.println("Found fingerprint sensor!");
  } else {
    Serial.println("Did not find fingerprint sensor :(");
    while (1) { delay(1); }
  }

  finger.getTemplateCount();
  Serial.print("Sensor contains "); Serial.print(finger.templateCount); Serial.println(" templates");
  Serial.println("Waiting for valid finger...");
}


void loop() 
  
{
  fingerprintID = getFingerprintIDez();
  delay(50);         
   if (fingerprintID == 1)
   {
   
     mainUser = true; 
   }
   else if (fingerprintID != 1)
   {
     mainUser = false;
   }
  while (mainUser)
  {
   int sensorReading = analogRead(analogPin); // Analog input
   int ledLevel = map(sensorReading, 0, 1023, 0, ledCount);
      for (int thisLed = 0; thisLed < ledCount; thisLed++) 
      {
        if (thisLed < ledLevel) 
        { 
          digitalWrite(ledPins[thisLed], HIGH);
        }
        else 
         { // Turn off LEDs in sequence
            digitalWrite(ledPins[thisLed], LOW);
         }
}
  }

  if (mainUser = false)
  {
    digitalWrite(buzzerPin, HIGH); // Send potentiometer value to LED
    digitalWrite(errorPin, HIGH); // Send potentiometer value to LED
    delay(500);

  }
} // end of main 

// returns -1 if failed, otherwise returns ID #
int getFingerprintIDez() {
  uint8_t p = finger.getImage();
  if (p != FINGERPRINT_OK)  return -1;

  p = finger.image2Tz();
  if (p != FINGERPRINT_OK)  return -1;

  p = finger.fingerFastSearch();
  if (p != FINGERPRINT_OK)  return -1;
  
  // found a match!
  Serial.print("Found ID #"); Serial.print(finger.fingerID); 
  Serial.print(" with confidence of "); Serial.println(finger.confidence);
  return finger.fingerID; 
}