A Line Follower Bot

Thanks, UTSOURCE.net to offer electronic components for our projects .

Code time!

This is where the magic happens. The code knows how to "talk" to all of your components and helps you test your circuit

This is what you need to do:

• Download Firmware.zip
• Extract all files to new folder ("Firmware")
• Open "firmware.ino" using Arduino IDE (You can download it here)
• Make sure the board is connected to your computer via USB
• In Arduino IDE- don't forget to select the correct Port and Board in the tool menu.
• Upload "Firmware.ino" to your board.

Download Firmware.zip

Great! now you can move on to the "Test" section.

Raspberry Pi Beta Release does not yet support code libraries for Raspberry Pi.

To set up your Raspberry Pi and start working with component libraries, consult www.raspberrypi.com

This is your BoM!

Browse it, buy what you need and start wiring!

Note: the list may contain peripheral components that were not originally selected by you, but need to be used for the circuit to work properly.

Go to Wire

Welcome to your circuito.io project

BoM (Bill of Materials)

Here's a list of all the components you'll need.

Go to BOM

Wire

Follow the step-by-step guide to build your circuit

Go to Wire

Code

Download the sample code and customize it to do what you want.

Go to Code

Test

Something wrong? Run tests for each component in the project and find the error easily.

Go to Test

Share

All done? Share your project's unique circuito

Go to Share

Ready to start? click on the side menu and see all the goodies

Terms

By using the services made available at circuito.io you agree to our Terms of Use.

Licenses

Firmware code libraries provided by us in the.zip file which we have made available for download on this page are governed by separate license terms. This means you may only use these libraries in accordance with those license terms.

For each library included in the.zip file which is governed by separate license terms, we have made that library's license terms and other information required by the license available in a corresponding ".txt" file (which will have the same file name as that library with the addition of the word "license").

All content and materials provided by us, are the sole and exclusive property of Roboplan Technologies Ltd. and you may use them in accordance with our Terms of Use, including without limitation, Sections 6 (Restrictions) and 9 (Intellectual Property Rights).

Disclaimer

As further described in our Terms of Use, all content is provided by us "as is", with no warranties or guaranties, express or implied, and without any technical support from us. Any separate or third party license terms do not derogate from, or limit the application of, the disclaimers of warranties, notices, warnings, or the limitations of liability set forth in the Terms of Use.

Congratulations! you're done.

Tell the world about your new project!

share on

Or just copy the circuito url:

Tell us what you think about circuito Leave a feedback

This is a preview, to use the code please download and extract it

Download Firmware.zip

Connect Your Project to the internet

Created with Rapha�l 2.1.0780Moisture01023

Created with Rapha�l 2.1.023Temperature-25+85

Created with Rapha�l 2.1.0400Light01023

Create a colorful dashboard for your project with Freeboard. 1. Click on "create your dashboard" 2. A freeboard dashboard will be created for your project and linked to dweet.io 3. Messages sent by your device to dweet.io will also be sent to your Freeboard Privacy Alert: Messages are Publically Available and may be edited by others