In previous post I showed you how to make obstacle avoiding robotic car. n this project, I will show you how to design and develop a Bluetooth Controlled Robot using Arduino, HC-05 Bluetooth Module and L298N Motor Driver Module.
Components- Arduino UNO
- DC Motors-12v
- Bluetooth module HC-05
- Motor Driver L293D
- 9 Volt Battery
- 4.5Volt rechargable v battery-2
- Battery Connector
- Arduino Car kit
Thanks UTSOURCE.net to offer electronic components for my projects
Bluetooth controlled car is controlled by using Android mobile phone instead of any other method like buttons, gesture etc. Here only needs to touch button in android phone to control the car in forward, backwardd, left and right directions. So here android phone is used as transmitting device and Bluetooth module placed in car is used as receiver. Android phone will transmit command using its in-built Bluetooth to car so that it can move in the required direction like moving forward, reverse, turning left, turning right and stop.
Circuit DesignBluetooth module -> Arduino
Vcc ____________ +5V
GND ___________ GND
Tx ____________ D3
L298n module -> Arduino
IN1__________ D9
IN2 __________D10
IN3 __________D11
IN4 ___________D12
GND __________GND
Here I have given power supply to L298n Module's 12Volt pin similarly have given the ground cable to GND pin of L298n module.
The robot chassis which I am using in this Bluetooth Controlled Robot Car project is supplied with 2 geared motors. I have joined the left side motor as one set and the right side motor as other set and connected both these sets to the output of L298N Module.
Bluetooth app
Download the app from here.
First, in the Android App, I have used 5 keys as Forward, Reverse, Left, Right and Stop. The corresponding data associated with each key is as follows:
- Forward β 1
- Reverse β 2
- Left β 3
- Right β 4
- Stop β 5
When a key is pressed, the corresponding data is transmitted to the Bluetooth Module from the Phone over Bluetooth Communication.
for more project visit here
Comments