Published April 6, 2016 © GPL3+

Ardunori RC - Arduino based Tenori-On Remote Controller

Proof-of-Concept for an Arduino Midi Controller for a Yamaha Tenori-On.

Intermediate4,316

Ardunori RC - Arduino based Tenori-On Remote Controller

Things used in this project

Hardware components

Arduino Mega 2560

Breadboard

Solderless Breadboard Full Size

RGB Diffused Common Cathode

SparkFun Pushbutton switch 12mm

5-pole DIN female connector

Resistor 221 ohm

6N138 optocoupler

Resistor 10k ohm

Jumper wires (generic)

1N4148 – General Purpose Fast Switching

Resistor 475 ohm

Hand tools and fabrication machines

Soldering iron (generic)

Story

https://www.youtube.com/watch?v=Xg3ltSjQTvw

For some time I was in search of the right programming project. When I was reading about the arduino platform and its possibilities, suddenly I had the idea for this Yamaha Tenori-On remote controller. I got an Arduino Mega and some other stuff and started circumventing. I found these tutorials and built the code for the first proof-of-concept from it:

https://www.arduino.cc/en/Tutorial/De...

https://www.arduino.cc/en/Tutorial/Midi

http://libremusicproduction.com/tutor...

http://chemiker1981.blogspot.de/2010/...

The code of this the project could be found here:

https://github.com/artphrases/ardunor...