antiElectron
Published © CC BY

Simple wall clock using Adafruit 1/4 60 Ring Neopixel

Simple wall clock using Adafruit 1/4 60 Ring Neopixel

BeginnerFull instructions provided2 hours11,222

Things used in this project

Story

Read more

Custom parts and enclosures

3D print parts for Neopixel ring wall clock

Code

Simple Neopixel ring clock

Arduino
#include <Wire.h>
#include <RTClib.h>
#include <Adafruit_NeoPixel.h>

#define PIN 6
#define PIXEL 60


Adafruit_NeoPixel strip = Adafruit_NeoPixel(PIXEL, PIN, NEO_GRB + NEO_KHZ800);

RTC_DS1307 RTC; // Establish clock object
DateTime Clock; // Holds current clock time

byte hourval, minuteval, secondval;


void setup() {
 Serial.begin(9600);
  Wire.begin();        	// Begin I2C
  RTC.begin();   // begin clock
  
    if (! RTC.isrunning()) {
//	Serial.println("RTC is NOT running!");
	// following line sets the RTC to the date & time this sketch was compiled

  }
  
//  RTC.adjust(DateTime(__DATE__, __TIME__));
  strip.begin();
  strip.show(); // Initialize all pixels to 'off'
  strip.setBrightness(20);

}


void loop() {

   
    Clock = RTC.now(); // get the RTC time
    
    secondval = Clock.second();  // get seconds
    minuteval = Clock.minute();  // get minutes
    hourval = Clock.hour();  	// get hours


    if(hourval > 11) hourval -= 12; // This clock is 12 hour, if 13-23, convert to 0-11
    hourval = (hourval*60 + minuteval) / 12;   
   
    strip.setPixelColor(hourval, 0x008080);strip.setPixelColor(hourval-1, 0x004040);strip.setPixelColor(hourval+1, 0x004040);
//    strip.setPixelColor(hourval-2, 0x001010);strip.setPixelColor(hourval+2, 0x001010);
    strip.setPixelColor(minuteval, 0x800080);
//    strip.setPixelColor(minuteval-1, 0x200020);strip.setPixelColor(minuteval+1, 0x200020);
    strip.setPixelColor(secondval, 0x808000);//strip.setPixelColor(secondval-1, 0x002F00);strip.setPixelColor(secondval+1, 0x002F00);
    strip.show();
    
    strip.setPixelColor(hourval, 0x000000);strip.setPixelColor(hourval-1, 0x000000);strip.setPixelColor(hourval+1, 0x000000);
    strip.setPixelColor(hourval-2, 0x000000);strip.setPixelColor(hourval+2, 0x000000); 
    strip.setPixelColor(minuteval, 0x000000);strip.setPixelColor(minuteval-1, 0x000000);strip.setPixelColor(minuteval+1, 0x000000);
    strip.setPixelColor(secondval, 0x000000);//strip.setPixelColor(secondval-1, 0x000000);strip.setPixelColor(secondval+1, 0x000000);
  
  delay(25);


/*
   Serial.print(hourval, DEC);
   Serial.print(':');
  Serial.print(minuteval, DEC);
   Serial.print(':');
   Serial.println(secondval, DEC);
*/



}

Credits

antiElectron

antiElectron

19 projects • 78 followers

Comments