Overview
Things
Story

Step One: Mounting WisBlock parts
Step Two: Lick to PC (via USB cable
Step Three: Steup Arduino IDE and load files
Step Four: Upload the code

Code
Credits
Comments(0)

Antonio Valente

Alexandre Breda Matos & Miguel Azevedo (Esc. Sec. S. Pedro, Vila Real, Portugal) • Posted by Antonio Valente

Published September 23, 2024 © CC BY

IoT Education Kit - Using RAK1206

This project is an integral part of using the IoT Education Kit provided by the Erasmus + DSIoT project. In this project, the RAK1906 sensor

BeginnerFull instructions provided1 hour127

IoT Education Kit - Using RAK1206

Things used in this project

Hardware components

WisBlock Base Board RAK5005-O

RAKwireless WisBlock Base Board RAK5005-O

This component is part of the IoT Education Kit

×

1

WisBlock LPWAN Module RAK4631

RAKwireless WisBlock LPWAN Module RAK4631

This component is part of the IoT Education Kit

×

1

WisBlock Environmental Sensor RAK1906

RAKwireless WisBlock Environmental Sensor RAK1906

This component is part of the IoT Education Kit

×

1

Software apps and online services

Arduino IDE

Ubidots

Hand tools and fabrication machines

RAKwireless Mini screwdriver

This component is part of the IoT Education Kit

RAKwireless screws

This component is part of the IoT Education Kit

Story

Step One: Mounting WisBlock parts

Step Two: Lick to PC (via USB cable)

Step Three: Steup Arduino IDE and load files

Step Four: Upload the code

Code

Credits

Alexandre Breda Matos & Miguel Azevedo (Esc. Sec. S. Pedro, Vila Real, Portugal)

Posted by

Antonio Valente

Thanks to Bernd Giesecke.

Comments