abetoo
Published © GPL3+

Peltier Controlled From An Android App

Arduino temperature control sketch, managed from an Android.

BeginnerShowcase (no instructions)1 hour13,306
Peltier Controlled From An Android App

Things used in this project

Story

Read more

Schematics

Fritz

Code

tutorial_relays.ino

Arduino
/*
    Sample program to manage relays a receive messages
    Copyright (C) 2017  Chocron J.

    This program is free software: you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
    the Free Software Foundation, either version 3 of the License, or
    (at your option) any later version.

    This program is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    GNU General Public License for more details.

    You should have received a copy of the GNU General Public License
    along with this program.  If not, see <http://www.gnu.org/licenses/>.
*/  
#include <LiquidCrystal.h>
#include "abtoo.h"

// Relays
int r1 = 16; // GPIO16
int r2 = 5;  // GPIO5
int r3 = 4;  // GPIO4

// LCD
int rs = 0;  // GPIO0
int en = 2;  // GPIO2
int d4 = 14; // GPIO14
int d5 = 12; // GPIO12
int d6 = 13; // GPIO13
int d7 = 15; // GPIO15

// initialize the library with the numbers of the interface pins
LiquidCrystal lcd(rs, en, d4, d5, d6, d7);

// WiFi
char* ssid = "MYSSID";
char* password = "MYPASSWORD";
AbetooIno abtoino;

// Message received callback
void messageReceived(String message)
{
  if (message == "r1on")
  {
    digitalWrite(r1, LOW);
  }
  else if (message == "r1off")
  {
    digitalWrite(r1, HIGH);
  }
  else if (message == "r2on")
  {
    digitalWrite(r2, LOW);
  }
  else if (message == "r2off")
  {
    digitalWrite(r2, HIGH);
  }
  else // text message
  {
    lcd.setCursor(0,1);
    lcd.print(message+"                ");
  }
}

void setup() {
  // Initialize pins
  pinMode(rs, OUTPUT);
  pinMode(en, OUTPUT);
  pinMode(d4, OUTPUT);
  pinMode(d5, OUTPUT);
  pinMode(d6, OUTPUT);
  pinMode(d7, OUTPUT);

  // Initialize LCD
  lcd.begin(16, 2);
  lcd.setCursor(0,0);
  lcd.print("Abetoo IoT");
  lcd.setCursor(0,1);
  lcd.print("Arduino Library");

  Serial.begin(9600);
  delay(10);

  // Initialize Relay's pins
  pinMode(r1, OUTPUT);
  pinMode(r2, OUTPUT);
  pinMode(r3, OUTPUT);
  digitalWrite(r1, HIGH);
  digitalWrite(r2, HIGH);
  digitalWrite(r3, HIGH);
 
  // Connect to WiFi network
  Serial.println();
  Serial.println();
  Serial.print("Connecting to ");
  Serial.println(ssid);
 
  WiFi.begin(ssid, password);
 
  while (WiFi.status() != WL_CONNECTED) {
    delay(500);
    Serial.print(".");
  }
  Serial.println("");
  Serial.println("WiFi connected");

  abtoino.init("uuid1", "-TbVO-rqdA0iWg6-gWh0eeQ636243460528994051#735acf9cd6eda96e66ee3858496dca59d750aff1", 1, messageReceived);
}

void loop()
{
  abtoino.abetooloop();
}

Credits

abetoo

abetoo

0 projects • 7 followers
Software and Hardware Development

Comments