DrOpShOtZ
Published

Arduino LED Blink

Turns an LED on for one second, then off for one second, repeatedly.

BeginnerProtip1,274
Arduino LED Blink

Things used in this project

Hardware components

Jumper wires (generic)
Jumper wires (generic)
×2
Arduino UNO
Arduino UNO
×1
Breadboard (generic)
Breadboard (generic)
×1
LED (generic)
LED (generic)
×1
Resistor 220 ohm
Resistor 220 ohm
×1

Software apps and online services

Arduino IDE
Arduino IDE

Story

Read more

Schematics

LED BLINK ARDUINO

The circuit diagram

Code

LED BLINK ARDUINO CODE

Arduino
void setup()
{
  pinMode(13, OUTPUT);
}

void loop() {
  digitalWrite(13, HIGH);
  delay(1000);
  digitalWrite(13, LOW);
  delay(1000);
}

Credits

DrOpShOtZ
12 projects • 18 followers
Contact me from Discord. DrOpShOtZ#6290

Comments