Published March 11, 2021 © LGPL

How to Make RGB Lighting 🌈 Neon Color Changing Wall Clock

How to Make RGB Lighting Clock🌈 Neon Color Changing Wall Clock using ws2812 LEDs, DS3231, DHT11, Arduino UNO

BeginnerFull instructions provided1 hour3,775

Things used in this project

Hardware components

Arduino UNO

ws2812 RGB LEDs

DS3231

DHT11

Jumper wires

Breadboard

Story

Hi guys, today this project we using Arduino UNO, and get the real time via DS3231 clock module, get temperature via DHT11 sensor. And then, let the WS2812 to display the real time and temperature which can switch degree centigrade and Fahrenheit degree.

Arduino UNO does not have WIFI function and cannot get the time from the network or computer, so we have to upload the current time to the DS3231 module first. The WS2812 display time is only shows hours and minutes. We get the seconds from DS3231 to display through the serial port. And we set 0-39 seconds is the display time, 40-49 seconds is the Celsius, and 50-59 seconds is the Fahrenheit.

► Code in GitHub (scheme and sketch) and Case 3D print files:

https://github.com/DKARDU/wa2812clock

► Components

The following parts were used in this project:

Arduino UNO, https://amzn.to/3ihYFBl

1 x 144pcs ws2812 RGB Leds, https://amzn.to/3g1v5za

1 x DS3231, https://amzn.to/38tkgEt

1 x DHT11, https://amzn.to/38IB3Uk

Jumper wires, https://amzn.to/3jCHhZd

Breadboard, https://amzn.to/33yEavN

❤Subscribe It's Free https://bit.ly/2C6HdAg

Thanks for watching, Stay home and Be safe...Have a great day!

#Arduinoproject #Arduinogamepad #Howto #LEDclock #LEDtimeclock #ws2812clock #ws2812timedisplay #LEDtemperature #ws2812temperature

#colorchanging #colorchangingclock

1 / 3

Code

ws2812_clock1.ino

#include <Adafruit_NeoPixel.h>
#include <Wire.h>
#include "DHT.h"
#include "RTClib.h"
RTC_DS3231 RTC;
#define DHTPIN A0
#define DHTTYPE DHT11 
DHT dht(DHTPIN, DHTTYPE);
#define PIN  7
#define POT_PIN  8
#define BTN  3
#define button 2
#define dataPin 8 
uint8_t NUMPIXELS = 4; //led number of pot_pin 
uint8_t NUM_DIGIT = 4;

const uint8_t LEDS_PER_DIGIT = 35;
uint16_t NUM_LEDS = LEDS_PER_DIGIT * NUM_DIGIT;//35*4=140

uint8_t time_h = 0;
uint8_t time_m = 0;
uint8_t time_s = 0;
int num = 0;
int check = 0;
boolean oldState = HIGH;
int Temperature = 0;
float ambiant_light = 1.0;
bool mask_digit[13][35] =
{
  { //0
    1, 1, 1, 1, 1,   //E
    1, 1, 1, 1, 1,   //F
    1, 1, 1, 1, 1,   //A
    1, 1, 1, 1, 1,   //B
    0, 0, 0, 0, 0,   //G
    1, 1, 1, 1, 1,   //D
    1, 1, 1, 1, 1    //C
  },
  { //1 
    0, 0, 0, 0, 0,   //E
    0, 0, 0, 0, 0,   //F
    0, 0, 0, 0, 0,   //A
    1, 1, 1, 1, 1,   //B
    0, 0, 0, 0, 0,   //G
    0, 0, 0, 0, 0,   //D
    1, 1, 1, 1, 1    //C
  },
  { //2
    1, 1, 1, 1, 1,  //E
    0, 0, 0, 0, 0,  //F
    1, 1, 1, 1, 1,  //A
    1, 1, 1, 1, 1,  //B
    1, 1, 1, 1, 1,  //G
    1, 1, 1, 1, 1,  //D
    0, 0, 0, 0, 0   //C
  },
  { //3
    0, 0, 0, 0, 0,  //E
    0, 0, 0, 0, 0,  //F
    1, 1, 1, 1, 1,  //A
    1, 1, 1, 1, 1,  //B
    1, 1, 1, 1, 1,  //G
    1, 1, 1, 1, 1,  //D
    1, 1, 1, 1, 1   //C
  },
  { //4
    0, 0, 0, 0, 0,   //E
    1, 1, 1, 1, 1,   //F
    0, 0, 0, 0, 0,   //A
    1, 1, 1, 1, 1,  //B
    1, 1, 1, 1, 1,   //G
    0, 0, 0, 0, 0,  //D
    1, 1, 1, 1, 1    //C
  },
  { //5
    0, 0, 0, 0, 0,   //E
    1, 1, 1, 1, 1,   //F
    1, 1, 1, 1, 1,   //A
    0, 0, 0, 0, 0,   //B
    1, 1, 1, 1, 1,   //G
    1, 1, 1, 1, 1,   //D
    1, 1, 1, 1, 1    //C
  },
  { //6
    1, 1, 1, 1, 1,
    1, 1, 1, 1, 1,
    1, 1, 1, 1, 1,
    0, 0, 0, 0, 0,
    1, 1, 1, 1, 1,
    1, 1, 1, 1, 1,
    1, 1, 1, 1, 1
  },
  { //7
    0, 0, 0, 0, 0,
    0, 0, 0, 0, 0,
    1, 1, 1, 1, 1,  //A
    1, 1, 1, 1, 1,  //B
    0, 0, 0, 0, 0,
    0, 0, 0, 0, 0,
    1, 1, 1, 1, 1   //C
  },
  { //8
    1, 1, 1, 1, 1,
    1, 1, 1, 1, 1,
    1, 1, 1, 1, 1,
    1, 1, 1, 1, 1,
    1, 1, 1, 1, 1,
    1, 1, 1, 1, 1,
    1, 1, 1, 1, 1
  },
  {  //9
    0, 0, 0, 0, 0,
    1, 1, 1, 1, 1,
    1, 1, 1, 1, 1,
    1, 1, 1, 1, 1,
    1, 1, 1, 1, 1,
    1, 1, 1, 1, 1,
    1, 1, 1, 1, 1
  },

  {  //o
    0, 0, 0, 0, 0,  //E
    1, 1, 1, 1, 1,  //F
    1, 1, 1, 1, 1,  //A
    1, 1, 1, 1, 1,  //B
    1, 1, 1, 1, 1,  //G
    0, 0, 0, 0, 0, // D
    0, 0, 0, 0, 0   //C
  },

   {  //C
    1, 1, 1, 1, 1,
    1, 1, 1, 1, 1,
    1, 1, 1, 1, 1,
    0, 0, 0, 0, 0,      
    0, 0, 0, 0, 0,
    1, 1, 1, 1, 1,
    0, 0, 0, 0, 0
  },

   {  //F
    1, 1, 1, 1, 1,  //E
    1, 1, 1, 1, 1,  //F
    1, 1, 1, 1, 1,  //A
    0, 0, 0, 0, 0,  //B
    1, 1, 1, 1, 1,  //G
    0, 0, 0, 0, 0,  //D
    0, 0, 0, 0, 0   //C
  },
};
Adafruit_NeoPixel strip = Adafruit_NeoPixel(NUM_LEDS, PIN, NEO_GRB + NEO_KHZ800);
Adafruit_NeoPixel pixels(NUMPIXELS, POT_PIN, NEO_GRB + NEO_KHZ800);

byte colors[3][3] = { 
  {0xff, 0, 0},
  {0xff, 0xff, 0xff},
  {0   , 0   , 0xff}
};

void setup()
{
  Serial.begin(9600);
  Wire.begin();
  RTC.begin();
  if (RTC.lostPower())
  {
    Serial.println("RTC is NOT running!");
    // Following line sets the RTC to the date & time this sketch was compiled
    // RTC.adjust(DateTime(__DATE__, __TIME__));
   //  RTC.adjust(DateTime(2022, 1, 5, 11, 25, 0));
  }
  strip.begin(); 
  pixels.begin();
  strip.show(); // Initialize all pixels to 'off'
  pinMode(BTN, INPUT);
  pinMode(button,INPUT_PULLUP);
}

void loop()
{
 Temperature = dht.readTemperature();
  Serial.println(Temperature);
  DateTime now = RTC.now();
  time_h = now.hour();
  time_m = now.minute();
  time_s = now.second();
  int digit_4 = time_h / 10; //10 states, 0-9
  int digit_3 = time_h % 10; //10 states, 0-9
  int digit_2 = time_m / 10; //10 states, 0-9
  int digit_1 = time_m % 10; //10 states, 0-9
//    Serial.print(digit_4);
//    Serial.print(digit_3);
//    Serial.print(digit_3); 
//    Serial.print(" : ");
//    Serial.print(digit_2);
//    Serial.println(digit_1);
    Serial.print(time_s);
    Serial.println(" s");
  
  int digit_5 = Temperature / 10;
  int digit_6 = Temperature % 10;

  int Fahrenheit = Temperature * 1.8 + 32;
  int digit_7 = Fahrenheit / 10;
  int digit_8 = Fahrenheit % 10;


  byte *c;
  bool map_num[NUM_LEDS] = {};//NUM_LEDS = 140;
   while(time_s >= 0 && time_s < 40){

  for (int i = 0; i < LEDS_PER_DIGIT; i++)
  {
    map_num[i] = mask_digit[digit_4][i];
  }
  for (int i = LEDS_PER_DIGIT; i < 2 * LEDS_PER_DIGIT; i++)
  {
    map_num[i] = mask_digit[digit_3][i - LEDS_PER_DIGIT];
  }
  for (int i = 2 * LEDS_PER_DIGIT; i < 3 * LEDS_PER_DIGIT; i++)
  {
    map_num[i] = mask_digit[digit_2][i - 2 * LEDS_PER_DIGIT];
  }
  for (int i = 3 * LEDS_PER_DIGIT; i < 4 * LEDS_PER_DIGIT; i++)
  {
    map_num[i] = mask_digit[digit_1][i - 3 * LEDS_PER_DIGIT];
  }
  
  for(int i=0; i<NUMPIXELS;i++) { // For each pixel...

  pot_led_on(0,3);
  }
 
  break;

   }

  //========================================
   while(time_s < 50 && time_s >= 40)
 {
  for (int i = 0; i < LEDS_PER_DIGIT; i++)
  {
    map_num[i] = mask_digit[digit_5][i];
  }
  for (int i = LEDS_PER_DIGIT; i < 2 * LEDS_PER_DIGIT; i++)
  {
    map_num[i] = mask_digit[digit_6][i - LEDS_PER_DIGIT];
  }
  for (int i = 2 * LEDS_PER_DIGIT; i < 3 * LEDS_PER_DIGIT; i++)
  {
    map_num[i] = mask_digit[10][i - 2 * LEDS_PER_DIGIT];
  }
  for (int i = 3 * LEDS_PER_DIGIT; i < 4 * LEDS_PER_DIGIT; i++)
  {
    map_num[i] = mask_digit[11][i - 3 * LEDS_PER_DIGIT];
  }
  for(int i=0; i<NUMPIXELS;i++) { // For each pixel...

  pot_led_off(0,3);
  }
  
  break;
 }
  //===========================================
  while(time_s < 60 && time_s >= 50){
  for (int i = 0; i < LEDS_PER_DIGIT; i++)
  {
    map_num[i] = mask_digit[digit_7][i];
  }
  for (int i = LEDS_PER_DIGIT; i < 2 * LEDS_PER_DIGIT; i++)
  {
    map_num[i] = mask_digit[digit_8][i - LEDS_PER_DIGIT];
  }
  for (int i = 2 * LEDS_PER_DIGIT; i < 3 * LEDS_PER_DIGIT; i++)
  {
    map_num[i] = mask_digit[10][i - 2 * LEDS_PER_DIGIT];
  }
  for (int i = 3 * LEDS_PER_DIGIT; i < 4 * LEDS_PER_DIGIT; i++)
  {
    map_num[i] = mask_digit[12][i - 3 * LEDS_PER_DIGIT];
  }
  for(int i=0; i<NUMPIXELS;i++) { // For each pixel...

  pot_led_off(0,3);
  }
  break;
  } 
    for (uint16_t j = 256; j > 0; j--) { // 5 cycles of all colors on wheel
    for (uint16_t i = 0; i < NUM_LEDS; i++) {
     c = Wheel(((i * 256 / (NUM_LEDS/4)) + j) & 255); //each digit is rainbow
    // c = Wheel(((i * 256 / (NUM_LEDS*8)) + j) & 255); //slow transition
      if (map_num[i] == 1)
      {
        uint8_t R = *c * ambiant_light;
        uint8_t G = *(c + 1) * ambiant_light;
        uint8_t B = *(c + 2) * ambiant_light;
        setPixel(i, R, G, B);
      }
      else
        setPixel(i, 0, 0, 0);
    }
    showStrip();
    delay(20);
  }

}

void pot_led_on(int x, int y){
  
    pixels.setPixelColor(x, pixels.Color(255, 255, 255));
    pixels.setPixelColor(y, pixels.Color(255, 255, 255));
    pixels.show();   // Send the updated pixel colors to the hardware.
}


void pot_led_off(int x, int y){
  
    pixels.setPixelColor(x, pixels.Color(0, 0, 0));
    pixels.setPixelColor(y, pixels.Color(0, 0, 0));
    pixels.show();   // Send the updated pixel colors to the hardware.
}
 
void rainbowCycle(uint8_t SpeedDelay, int d4, int d3, int d2, int d1, float ambiant_light)
{
  
  byte *c;
  uint16_t i, j;
  bool map_num[NUM_LEDS] = {};
  for (int i = 0; i < LEDS_PER_DIGIT; i++)
  {
    map_num[i] = mask_digit[d4][i];
  }
  for (int i = LEDS_PER_DIGIT; i < 2 * LEDS_PER_DIGIT; i++)
  {
    map_num[i] = mask_digit[d3][i - LEDS_PER_DIGIT];
  }
  for (int i = 2 * LEDS_PER_DIGIT; i < 3 * LEDS_PER_DIGIT; i++)
  {
    map_num[i] = mask_digit[d2][i - 2 * LEDS_PER_DIGIT];
  }
  for (int i = 3 * LEDS_PER_DIGIT; i < 4 * LEDS_PER_DIGIT; i++)
  {
    map_num[i] = mask_digit[d1][i - 3 * LEDS_PER_DIGIT];
  }
 
  for (j = 0; j < 256; j++) { // 5 cycles of all colors on wheel5
    for (i = 0; i < NUM_LEDS; i++) {
      c = Wheel(((i * 256 / (NUM_LEDS)) + j) & 255);
      if (map_num[i] == 1)
      {
        uint8_t R = *c * ambiant_light;
        uint8_t G = *(c + 1) * ambiant_light;
        uint8_t B = *(c + 2) * ambiant_light;
        setPixel(i, R, G, B);
      }
      else
        setPixel(i, 0, 0, 0);
    }
    showStrip();
    delay(1);
  }
}

// *** REPLACE TO HERE ***

void showStrip() {
#ifdef ADAFRUIT_NEOPIXEL_H
  // NeoPixel
  strip.show();
#endif
#ifndef ADAFRUIT_NEOPIXEL_H
  // FastLED
  FastLED.show();
#endif
}

void setPixel(int Pixel, byte red, byte green, byte blue) {
#ifdef ADAFRUIT_NEOPIXEL_H
  // NeoPixel
  strip.setPixelColor(Pixel, strip.Color(red, green, blue));
#endif
#ifndef ADAFRUIT_NEOPIXEL_H
  // FastLED
  leds[Pixel].r = red;
  leds[Pixel].g = green;
  leds[Pixel].b = blue;
#endif
}

void setAll(byte red, byte green, byte blue) {
  for (int i = 0; i < NUM_LEDS; i++ ) {
    setPixel(i, red, green, blue);
    delay(1);
  }
  showStrip();
}

byte * Wheel(byte WheelPos) {
  static byte c[3];

  if (WheelPos < 85) {
    c[0] = WheelPos * 3;
    c[1] = 255 - WheelPos * 3;
    c[2] = 0;
  } else if (WheelPos < 170) {
    WheelPos -= 85;
    c[0] = 255 - WheelPos * 3;
    c[1] = 0;
    c[2] = WheelPos * 3;
  } else {
    WheelPos -= 170;
    c[0] = 0;
    c[1] = WheelPos * 3;
    c[2] = 255 - WheelPos * 3;
  }

  return c;
}

Credits

DKARDU

22 projects • 44 followers

Arduino

How to Make RGB Lighting 🌈 Neon Color Changing Wall Clock

Things used in this project

Hardware components

Story

Schematics

ws2812clock1_usySk1xiuv.jpg

Code

ws2812_clock1.ino

Credits

DKARDU

Comments

Embed the widget on your own site

How to Make RGB Lighting 🌈 Neon Color Changing Wall Clock

How to Make RGB Lighting 🌈 Neon Color Changing Wall Clock

Things used in this project

Hardware components

Story

Schematics

ws2812clock1_usySk1xiuv.jpg

Code

ws2812_clock1.ino

Credits

DKARDU

Comments

Related channels and tags