Arnov Sharma
Published © MIT

Smart Extension Board with ESP8266

Made a smart expansion board with help of an custom ESP07S Based PCB and few 3D Printed parts

BeginnerFull instructions provided1 hour263

Things used in this project

Hardware components

Espressif esp07S
×1
PCBWay Custom PCB
PCBWay Custom PCB
×1

Software apps and online services

Fusion 360
Autodesk Fusion 360

Hand tools and fabrication machines

3D Printer (generic)
3D Printer (generic)

Story

Read more

Custom parts and enclosures

Fusion360File

Schematics

WIRING

Code

code

C/C++
#include <ESP8266WiFi.h>

// Replace with your network credentials
const char *ssid = "JioFiber-nCDgC";
const char *password = "jiexaifieXai5chu";

// Set web server port number to 80
WiFiServer server(80);

// Variable to store the HTTP request
String header;

// Auxiliar variables to store the current output state
String output1State = "off";
String output2State = "off";

// Assign output variables to GPIO pins
const int output1 = 0; //RELAY1
const int output2 = 4; //RELAY2
const int ledPin1 = 15; //LED1
const int ledPin2 = 2; //LED2


void setup() {
  Serial.begin(115200);
  // Initialize the output variables as outputs
  pinMode(output1, OUTPUT);
  pinMode(output2, OUTPUT);

  //LEDs
  pinMode(ledPin1, OUTPUT);
  pinMode(ledPin2, OUTPUT);  
  // Set outputs to LOW
  digitalWrite(output1, LOW);
  digitalWrite(output2, LOW);

  // Connect to Wi-Fi network with SSID and password
  Serial.print("Connecting to ");
  Serial.println(ssid);
  WiFi.begin(ssid, password);
  while (WiFi.status() != WL_CONNECTED) {
    delay(500);
    Serial.print(".");
  }
  // Print local IP address and start web server
  Serial.println("");
  Serial.println("WiFi connected.");
  Serial.println("IP address: ");
  Serial.println(WiFi.localIP());
  server.begin();
}

void loop(){
  WiFiClient client = server.available();   // Listen for incoming clients

  if (client) {                             // If a new client connects,
    Serial.println("New Client.");          // print a message out in the serial port
    String currentLine = "";                // make a String to hold incoming data from the client
    while (client.connected()) {            // loop while the client's connected
      if (client.available()) {             // if there's bytes to read from the client,
        char c = client.read();             // read a byte, then
        Serial.write(c);                    // print it out the serial monitor
        header += c;
        if (c == '\n') {                    // if the byte is a newline character
          // if the current line is blank, you got two newline characters in a row.
          // that's the end of the client HTTP request, so send a response:
          if (currentLine.length() == 0) {
            // HTTP headers always start with a response code (e.g. HTTP/1.1 200 OK)
            // and a content-type so the client knows what's coming, then a blank line:
            client.println("HTTP/1.1 200 OK");
            client.println("Content-type:text/html");
            client.println("Connection: close");
            client.println();
            
            // turns the GPIOs on and off
            if (header.indexOf("GET /1/on") >= 0) {
              Serial.println("LOAD1 on");
              output1State = "on";
              digitalWrite(output1, HIGH);
              digitalWrite(ledPin1, HIGH);
            } else if (header.indexOf("GET /1/off") >= 0) {
              Serial.println("LOAD1 off");
              output1State = "off";
              digitalWrite(output1, LOW);
              digitalWrite(ledPin1, LOW);
            } else if (header.indexOf("GET /2/on") >= 0) {
              Serial.println("LOAD2 on");
              output2State = "on";
              digitalWrite(output2, HIGH);
              digitalWrite(ledPin2, HIGH);
            } else if (header.indexOf("GET /2/off") >= 0) {
              Serial.println("LOAD2 off");
              output2State = "off";
              digitalWrite(output2, LOW);
              digitalWrite(ledPin2, LOW);
            }
            
            // Display the HTML web page
            client.println("<!DOCTYPE html><html>");
            client.println("<head><meta name=\"viewport\" content=\"width=device-width, initial-scale=1\">");
            client.println("<link rel=\"icon\" href=\"data:,\">");
            // CSS to style the on/off buttons 
            // Feel free to change the background-color and font-size attributes to fit your preferences
            client.println("<style>html { font-family: Helvetica; display: inline-block; margin: 0px auto; text-align: center;}");
            client.println(".button { background-color: #5B196A; border: none; color: white; padding: 16px 40px;");
            client.println("text-decoration: none; font-size: 30px; margin: 2px; cursor: pointer;}");
            client.println(".button2 {background-color: #5B196A;}</style></head>");
            
            // Web Page Heading
            client.println("<body><h1>HOME AUTOMATION DUAL OUTPUT</h1>");
            
            // Display current state, and ON/OFF buttons for OUTPUT1 
            client.println("<p>LOAD1 - State " + output1State + "</p>");
           
            // If the output1State is off, it displays the ON button       
            if (output1State=="off") {
              client.println("<p><a href=\"/1/on\"><button class=\"button\">ON</button></a></p>");
            } else {
              client.println("<p><a href=\"/1/off\"><button class=\"button button2\">OFF</button></a></p>");
            } 
               
            // Display current state, and ON/OFF buttons for GPIO 4  
            client.println("<p>LOAD2 - State " + output2State + "</p>");
            
            // If the output4State is off, it displays the ON button       
            if (output2State=="off") {
              client.println("<p><a href=\"/2/on\"><button class=\"button\">ON</button></a></p>");
            } else {
              client.println("<p><a href=\"/2/off\"><button class=\"button button2\">OFF</button></a></p>");
            }
            client.println("</body></html>");
            
            // The HTTP response ends with another blank line
            client.println();
            // Break out of the while loop
            break;
          } else { // if you got a newline, then clear currentLine
            currentLine = "";
          }
        } else if (c != '\r') {  // if you got anything else but a carriage return character,
          currentLine += c;      // add it to the end of the currentLine
        }
      }
    }
    // Clear the header variable
    header = "";
    // Close the connection
    client.stop();
    Serial.println("Client disconnected.");
    Serial.println("");
  }
}

Credits

Arnov Sharma

Arnov Sharma

269 projects • 275 followers
Just your average MAKER

Comments

Related channels and tags
  • Autodesk
  • Espressif
  • Home Automation
  • Internet of Things
  • Lights
  • PCBWay
  • Robotics