3DR
Welcome to the 3DR community! Join to share projects and receive help.
Solo-Teardown
Easy
  • 6,661
  • 21

Protip

Instructions on how to tear down a Solo.

Solo Precision Landing Sensor - IRLOCK
Advanced
  • 5,462
  • 18

Full instructions

Solo autonomously lands on a small IR marker.

RETRACTS!!
Super hard
  • 7,237
  • 35

Full instructions

Add retractable legs to Solo!

Quadcopter Using KK 2.15 Module
Intermediate
  • 2,680
  • 18

Full instructions

Designing a quadcopter using FCB. KK 2.15 Module and controlling it via a Fly Sky 6 CH transmitter.

Extend 3DR Solo Accessory Bay
Intermediate
  • 11,320
  • 22

Protip

Extend the capabilities through the Extension Port in the Accessory Bay by adding PWM servo control and I2C applications.

Voice Controlled Drone with RasPi, Amazon Echo and 3DR IRIS+
Advanced
  • 11,696
  • 77

Full instructions

Fly a drone using only your voice. Launch, navigate around, and land. Look ma, no hands!

Dumb Legs
Intermediate
  • 3,826
  • 22

Full instructions

Moves antennas from legs to body to allow for leg modifications

Solo Servo Sweep
Intermediate
  • 4,728
  • 16

Full instructions

Add a servo to your solo using arduino, firmata, python, and a usb OTG

Scalable Intelligent Air Quality Monitoring and Response
Advanced
  • 3,712
  • 14

Full instructions

Air Quality Monitoring that uses the Intel Edison Compute Module, Amazon AWS, Visualization through Kibana, and drones!

CHIPBOOK
Advanced
  • 5,414
  • 18

Full instructions

Make Your Own NOTEBOOK Using CHIP.

Get the Maximum out of Your 3DR Solo GPS
Intermediate
  • 16,582
  • 13

Protip

All you need to know about how to tune your GPS and how to upgrade to multi-band receivers to achieve faster and more reliable GPS locks.

#‎SOLOMOD - Reducing Solo Gimbal Vibrations (V1)
Intermediate
  • 6,322
  • 12

Full instructions

This is a Solo MOD to try and isolate both harsh vibrations and micro vibrations when filming using the 3DR Solo drone with GoPro 3+ and 4.

FlyingROS
Advanced
  • 3,131
  • 20

Work in progress

FlyingROS is a set of tools and libraries helping you to make autonomous flight with your multicopter.

RepRap 3-Dimentional Additive Manufacturing Printer with IOT
Super hard
  • 2,939
  • 18

Self-replicating, rapid prototyping open source 3D printer using an Arduino 101 that can be controlled via Internet.

Compound level mapping boat
Super hard
  • 180
  • 3

Protip

Autonomous boat with a set of sensors is used to analyze the content of the water and creates a map according to the collected data.

Controller Amplifier by Drone Evolutions
Easy
  • 2,553
  • 7

Full instructions

Add powered wifi amplifiers to your controller with a great kit from Drone Evolutions!

Raspberry PI Noughts and Crosses/Tic Tac Toe
Intermediate
  • 1,262
  • 8

Full instructions

Build this noughts and crosses game first and you can build a sensory chessboard!

Spherical Video with Kodak 360
Easy
  • 2,768
  • 7

Full instructions

Capture spherical video with Solo and two Kodak 360's for watching flights in VR

Lidar-based Ground Collision Checking for 3DR Solo
Intermediate
  • 2,503
  • 5

Full instructions

You ever wanted to have ground collision avoidance, or terrain follow with your 3DR Solo drone? So here is what you need to do.

Photon Powered Millennium Falcon Drone
Super hard
  • 1,401
  • 3

Imagine the Millennium Falcon playing the Star Wars theme music & mimicking the laser cannon's visual and audio effects.

The "Flying Squirrel" Quadcopter
Intermediate
  • 221
  • 2

Full instructions

An large and versatile quad frame built from laser cut wood components. A full drone minus the flight controller.

Solo Motor Pod Covers from Broken Props
Easy
  • 846
  • 1

Full instructions

Broken props? Reuse them as threading protectors on the motor pods with this quick hack.

Sign up / LoginProjectsCommunitiesTopicsContestsLiveAppsBetaFree StoreBlog