PCBWay Arduino Cookie Christmas

Introduction

In this project you'll learn how to program the PCBWay Cookie Christmas Module for Arduino. Through this kit you'll learn how to create your frist code lines with Arduino.

It is a simple kit that can be used to teach logical programming in the classroom.

The Project

Now, you need understand how works the electronic schematic of the cookie module. In the Figure 1, we shown the circuit.

After to construct the electronic schematic, you'll create your own format through contour in the BoardOutline Layer.

The Printed Circuit Board

After this, we'll have the following result, that is presented in the Printed Circuit Board of the Figure 2.

After present the electronic schematic in PCB, we'll show the result of the Cookie PCB Prototype in the Figure 3.

Thus, through this kit, you'll create several Arduino Projects using LED's for children.

And to finish, you can use the code to playing with the Module with Arduino.

void setup() 
{
  // put your setup code here, to run once:
  //Config the pin 2 until pin 9 as OUTPUT
  for(byte pin = 2; pin < 7; pin++)
  {
    pinMode(pin, OUTPUT);
  }
}


void loop() 
{
  // put your main code here, to run repeatedly:
  digitalWrite(2, HIGH); //Signal light ON left
  delay(1000);
  digitalWrite(2, LOW); //Signal light OFF left
  digitalWrite(3, HIGH); //Signal light ON right
  delay(1000);
  digitalWrite(3, LOW); //Signal light OFF right


  digitalWrite(4, HIGH); //Turn ON Left Headlight LED 
  digitalWrite(5, HIGH); //Turn ON Right Headlight LED

  delay(1500);

  digitalWrite(4, LOW); //Signal light OFF right
  digitalWrite(5, LOW); //Signal light OFF right

Therefore, from the code, it will possibly control and fun with the cookie module for Arduino.

Conclusion

Through this project, you'll learn basic electronics, blink, and basics of the electronic schematic. In addition, you'll use the Arduino to program the kit and learn about logical programming.

Now, if you have interesting in obtaining this board, you can access the website and obtain your own PCB's.

Acknowledgment

Thanks to the PCBWay for support the our YouTube Channel and produce and assembly PCBs with better quality.

The Silícios Lab thanks UTSOURCE to offer the electronic components.