Arduino based Fire Fighting Robot using falme sensor

#include <Servo.h>
Servo myservo;
 
int pos = 0;    
boolean fire = false;
#define Forward_S 8 //forward sensor
 #define LM1 2       // left motor
#define LM2 3       // left motor
#define RM1 4       // right motor
#define RM2 5       // right motor
#define pump 6
 
void setup()
{
  pinMode(Forward_S, INPUT);
  pinMode(LM1, OUTPUT);
  pinMode(LM2, OUTPUT);
  pinMode(RM1, OUTPUT);
  pinMode(RM2, OUTPUT);
  pinMode(pump, OUTPUT);
 
 }
 
void put_off_fire()
{
    delay (500);
 
    digitalWrite(LM1, HIGH);
    digitalWrite(LM2, HIGH);
    digitalWrite(RM1, HIGH);
    digitalWrite(RM2, HIGH);
    
   digitalWrite(pump, HIGH);
   delay(500); 
  }
  digitalWrite(pump,LOW);
  fire=false;
}
 
void loop()

    {
    //Do not move the robot
    digitalWrite(LM1, HIGH);
    digitalWrite(LM2, HIGH);
    digitalWrite(RM1, HIGH);
    digitalWrite(RM2, HIGH);
    }
    
    else if (digitalRead(Forward_S) ==0) //If Fire is straight ahead
    {
    //Move the robot forward
    digitalWrite(LM1, HIGH);
    digitalWrite(LM2, LOW);
    digitalWrite(RM1, HIGH);
    digitalWrite(RM2, LOW);
    fire = true;
    }
    
    
delay(300); //Slow down the speed of robot
 
     while (fire == true)
     {
      put_off_fire();
     }
}