Projects made with Texas Instruments on Hackster.io
Sending waypoints via LabVIEW to Segbot for real-time navigation.
Read up about this project on
Frequency-to-voltage converter circuits, also known as F-to-V or FVC circuits, are widely used to measure speed and monitor flow rates.
Segbot that can be steered by specific notes on the piano and performs a dancing routine once it recognizes three distinct notes.
A goose that will find you and chase you to the ends of the earth.
Contains information about the implementation of the CC3100 WiFi processor for the RSLK MAX enhancement project.
This project is about a temperature detector incorporating buzzers that buzz once a certain temperature is attained.
Fall 2022 ME 461 Computer Control of Mechanical Systems Final Project. Robot car candy launcher with candy refill station. TI F38279D.
The website is about the final project for UIUC ME446 Robotics and Control course.
A robot that recognize target and wall with ultrasonic sensor and charges at the target.
Made an EREN YEAGER-themed PCB Art that has two LEDs connected with a 555 timer IC in BiStable Configuration.
An autonomous robot that line follows and moves 'snowballs' in its path out of the way and then continues lane following. Mimics a snowplow.
The operational amplifiers are the basic building block of electronics circuit they are smart and has a very low cost and outperforms.
Young parents: use our music player to play some of your child's favorite songs without the distractions of other apps!
The buck converter is one of the converters that circuit designers have proved to offer a variable voltage supply to devices and circuits.
Piloting, acquisition of cryostat, magnet, instrumentation and control of LASER beams in position for 2D material measures
"BEHERIT aka EGG OF KING" from berserk manga series made using PCB and electronics.
Industrial / imposing / mechanical form communal / sensory / playful interaction
Build a simple audio amplifier circuit with tone control, allowing users to amplify audio signals from audio source
Repeat the random pattern correctly and you receive a Jolly Rancher.
Made a Pumpkin themed PCB badge that uses a Bistable Multivibrator circuit for toggling two LED Output.
Breanna Chan and Brenna Kelly's final project for ME 461
This 3-joint robotic arm with attached load cell was created for my final embedded systems project at John Brown University.
In this project, I present the construction of a calorimeter based on the MSP 430 , Impeller type heat meter
Like the children’s game… but with deadlier stakes (disclaimer: may include life-threatening consequences).