Soldering station supported Hakko T12 tips and rework station 858D.
Soldering station supported Hakko T12 tips and rework Hot Air Gun 858D using color TFT ili9341 display.
Using STM32 to build a soldering iron controller. This time with a graphics OLED display.
How to build your own soldering iron controller for amazing Hakko T12 tips.
The united soldering and rework station that manages the Hakko T12 and JBC C245 tips together with Hot Air Gun 858D.
The soldering iron controller based on arduino that implements PID method to keep the temperature of the iron.
A upgrade to my SMD Hot Plate with a larger hot plate, better cooling and updated software.
Build your own temperature controlled Soldering Station
A SMD Hot Plate made from a Printed Circuit Board. It has multiple heat profiles and is capable of reaching over 220 degrees Celsius.
Just plug the device with an SD card inside into any USB port. It creates an FTP server where we can send and receive data to the SD card.
Did your somewhat expensive ($50) soldering iron just die? Well then fix it with another one!
An Arduino-based altimeter, mostly for model rocketry.
SMD reflow hot plate with a 200mm x 100mm surface area
A solder fume extractor that turns on in the presence of smoke from the soldering iron.
A 2021 revision of the original MBC design by Fabio Defabis with disk emulation on microSD. Runs CP/M + applications with a VT100 terminal.
The Cumin Lander is a small planetary lander-inspired circuit sculpture that displays time, temperature, humidity, and pressure.
The Reflowduino is a completely open-source, Arduino-compatible wireless reflow oven controller packed with features!
By using 4 WS2812s LEDs and an ATtiny85, create a figure stand that adapts to the light levels around it and customize the light patterns.
The famous 10-cent microcontroller deserves a 10-cent devboard. It's a quick-and-dirty solution from cheap and accessible components.
Simple, easy to assemble, programming and use with block structure, Arduino-based soldering station.
Make an SMD heatplate using a PTC heater and M5Stack parts.
Shows how cheap and easy electronics can be in 2025: KiCad + ESP32‑C3, home reflow, ESP‑IDF. Free tools that make electronics accessible
Add voice control to your car using Raspberry Pi and Amazon Alexa.
Shuts down 3D printer shortly after a print completes.
