Connect a Modbus energy meter to an Arduino and monitor power consumption via Home Assistant.
A single Arduino Uno/Mega can carry up to 14 RS-232 boards. Each board is distinguished by ID, which is set via a DIP switch.
Measure soil temperature and moisture level at different soil depths using three Modbus RS485 soil moisture sensors.
Measure temperature, humidity, pressure, light intensity, rainfall, particulate matter, wind speed and wind direction on the Helium Network.
In this DIY guide, I will show you how to make your own security check system based on Arduino!
How to use RS485-based Modbus with a Raspberry Pi 3B+ and an RS485 HAT.
Power up your Raspberry Pi and use the RS-485 without unreliable USB connectors and additional adapters.
Easily connect Arduino boards at a great distance over RS485 with Visuino.
How to connect GPS, SONAR, sensors, auto pilot units, etc. in ships and boats via NMEA 0183 to Raspberry Pi.
Configuring Node-RED for usage with and our RS485 HAT on a Raspberry Pi.
Remote controlled buttons for activating hot water recirculation.
An ESP8266-based, wall-mounted thermostat with touchscreen and Modbus support.
Pilot a Push6060 with ATOM and Tail485 with IUFLOW
You will learn to manipulate and manage Modbus devices through the Bastwan development board and its Wing RS485 Modbus on Arduino IDE.
An industrial automation system for block sorting, utilizing Computer Vision and Finite State Machines, implemented with Edge Impulse.
The modbus RTU sensor XY-MD02 can be easily installed using a RS485 connection through a serial port to send temperature and humidity.
Use RS-485 Module to control MODBUS relays. You can control them over radio with MQTT commands from Node-RED
Combine the Elegoo UNO with the industrial suit Iono Solo to get a rugged PLC to control all your "heavy loads" and industrial equipment.
IPEM Plus - ESP32-C5 | ATM90E36 | LoRa | IoT Mains Power Energy Monitor
Modbus RTU with Waveshare ESP32-P4 high performance development board and RS485 HAT for Raspberry Pi.
The "IoTPi" multi-channel relay module board, which uses the Raspberry Pi microcontroller "RP2040, " has gained traction on Kickstarter.
ESPRanger is a compact and powerful STEM Community board that includes LoRa GNSS IMU RS485 Wide Operating Voltage 5-60V SDK
Create a flexible Modbus SDK for Arduino, allowing easy integration of any sensors for industrial-grade data communication and control.
This project refers to the UI and remote monitoring and control part.
