This will keep your rocket upright and on course!
The will gimbal a rocket motor back and forth to keep you rocket upright.
Make an altimeter for DIY model rockets!
This will keep your rocket upright and on course.
An Arduino-based altimeter, mostly for model rocketry.
This will keep your rocket going straight without fins!
A new customizable TVC mount that can stabilize your model rocket!
Fully autonomous rocket!
Add more fun to bottle rockets!
A efficient rocket motor for high and low powered rocketry.
Measure the thrust of a model rocket motor with an Arduino!
This launch pad helps your rocket go high and far!
This is RocketC.H.I.P.: a C.H.I.P. with specially configured WiFi and the circuity to control a relay. We use it to launch hobby rockets.
The Xenon controls itself to not by fins but by moving the motor at the bottom back and forth!
A small rocket test vehicle that launches without the use of fins!
Start a Helicopter Gas Turbine APU engine using an Arduino Uno, This is what they were made for !
This project allows to launch gunpowder rockets safely and with a lot of fun. (coutdown display with access code and sound).
A model rocket that guides itself autonomously.
This rocket engine was designed with the priority to go to space!!!!
This system can do a number of things for your rocket!
This can reliably deploy your rocket's parachute.
A Thrust Vector Controlled rocket that can maintain its orientation without the use of fins.
The hybrid rocket Chimera is a project of the Loughborough Space Society. This hackster. io project shows insights into the electronics team.
Make an easy altimeter using a BMP280 Barometric Air Pressure Module with a OLED Display Module and an Arduino NANO.
