IoT Enabled Hydroponic Farm
Highly scalable and powerful irrigation / hydroponic & aquaponic control system managing up to 32 zones with automation and sensors.
Use the IO Expander and Relay Expander with the Arduino to control up to 65,280 relays!
Frustrated with the prices for high quality grow light systems? Let's design a fully controllable, easy to adjust, open-source LED panel.
Make an EC/pH/ORP/temperature sensor device to monitor water. Interact with it through a website using Bluetooth Low Energy.
How to make a benchtop pH meter with an Arduino Uno and the Gravity analog pH sensor from Atlas Scientific.
An automated hydroponic system for growing strawberries using Grafana and InfluxDB.
The Green Box is an automated hydroponics system.
A system to maintain the pH level of a sample within a defined range.
How to connect multiple Atlas sensors to a single Arduino serial port.
Monitors temperature, PH, and Cl. levels and notifies you if anything is out of range.
This will show how to make a Bluetooth Low Energy Internet of Things device to monitor Electrical Conductivity for hydroponics.
Use 3D printing to solve the “Growing Chaos” problem.
Sensor platform for monitoring pH, temperature, 02 absorption, and conductivity for hydroponics systems.
This is a very simple and reliable hydroponic system that you can buy for a very cheap price.
Everyone's got a hydro garden. Here's how to make yours much cooler than the rest
The objective of this project is to develop an Automated Hydroponics system that integrates cellular IoT.
Real-time pH and salinity monitoring with LED indicators.
Build a sensor monitoring systems for your Hydroponics Growbed (Using New IO Adder!)
How to temperature compensate the Atlas conductivity sensor automatically.
DIY cloud connected hydroponics system powered by UniPi and Cloud4RPi
This device automatically runs colormetric tests of water. It dispenses reagents, mixes them, and categorizes the test results.
Grow your own lettuce, greens, and strawberries with a soil-less system that will give them just the right amount of nutrient rich water.
Maintain desired pH and nutrient level for your hydroponics setup, send data to Thingspeak.
