Analog-to-Digital Converter connected on I2c bus. ADS1115 is part of a product family witch contains ADS1113, ADS1114, ADS1014, ADS1015.
This project demonstrates how to stream samples from the ADC on the Zmod Digitizer into the DDR memory of the Eclypse Z7.
An Arduino Nano used as an IO expander on I2C for ESP8266. For example, add 8 digitals IO and 6 analog inputs.
A 3D printed set of scales that uses a 5kg load sensor and HX711 module.
Utilize the Zmod expansion header on the Eclypse Z7 with ADC & DAC Zmods in a simple sine wave loopback demonstration.
The purpose of this project is to get the best imaging whatever it is in the daytime or at night.
This project walks through how to create a custom hardware design in Vivado 2022.1 for the Eclypse Z7 with the new Digitizer Zmod.
A low budget acquisition system for low budget sensors.
Take a ride with our EV demo! GPIO switches, night mode via ADC photoresistor, I2C display, all on the phyCORE-RT1170. 🚗🔋✨
Sometimes you need to generate a analog signal from a digital source a DAC or a digital to analog converter helps you do this.
Learn how to build efficient motor control systems with STM32 microcontroller
This PVIM Board is a Precision, Eight Channel, Synchronous Data Acquisition board (DVM), with Simultaneously Sampled Isolated Inputs.
Monitor your heart precisely with this DIY electrocardiograph
In this project, the GreenPAK™ IC is used in the design of a carbon monoxide detector.
Learn how to interface the MCP3008 8-channel 10-bit ADC with an STM32 microcontroller using the SPI serial interface
This project will allow you to display a battery level and current date and time on the OLED expansion.
In this project, we will make a function generator using the gen4-uLCD-43DCT-CLB display module.
Discover precision with STM32 ADC & ACS712 Hall Effect-Based Current Sensor. Optimize current measurement for accurate power monitoring
This project continues with the bare metal application in Vitis for using the Digitizer Zmod on the Eclypse Z7 in a custom design.
A basic breakout for the ADG732 32 channel multiplexer and video tutorial!
I made an audio amplifier using a simple op-amp circuit that will be read using the STM-32 Nucleo.
Maybe I add the note latter. This project is about how to something to be digital.
The pH Level Monitor project uses 4D Systems' gen4-uLCD-50DT to display the pH level of a certain substance.
Explore the efficiency of embedded systems with STM32 ADC Scan Mode. Optimize analog channel acquisition for precise data collection
