Hardware and Software products

Edge AI Devices powered by Sony IMX500 smart Vision sensor

This is your complete toolkit for getting your IoT project live and in the cloud.

The most powerful wireless music system from Bose.

The SX1509 Breakout is a 16-channel GPIO expander with an I2C interface

The Intel® Edison is an ultra small computing platform that will change the way you look at embedded electronics. Each Edison is packed w...

The Intel® Edison is an ultra small computing platform that will change the way you look at embedded electronics. Each Edison is packed w...

The Intel® Edison is an ultra small computing platform that will change the way you look at embedded electronics. Each Edison is packed w...

The Intel® Edison is an ultra small computing platform that will change the way you look at embedded electronics. Each Edison is packed w...

The Intel® Edison is an ultra small computing platform that will change the way you look at embedded electronics. Each Edison is packed w...

The Intel® Edison is an ultra small computing platform that will change the way you look at embedded electronics. Each Edison is packed w...

This is the same product as the OBD-II UART. The difference is this version comes with the appropriate cable in fancy clamshell packaging...

The SparkFun DataLogger IoT - 9DoF is a data logger that comes preprogrammed to automatically log IMU, GPS, and various pressure, humidity,

The TMP102 is an easy-to-use digital temperature sensor from Texas Instruments.

This is the SparkFun ESP8266 Thing Dev Board — a development board that has been solely designed around the ESP8266

Want to start playing with sensors, but don’t know where to begin? This kit includes a variety of basic sensors for any beginner or exper...

The Intel® Edison is an ultra small computing platform that will change the way you look at embedded electronics. Each Edison is packed w...

The SparkFun Inventor’s Kit for Google’s Science Journal App is an interactive selection of tools to inspire future scientists and makers...

The SparkFun Inventor’s Kit (SIK) for micro:bit is a great way to get creative, connected and coding with the micro:bit.

The SparkFun Inventor’s Kit for RedBot is a great way to get started with two motor robotics and sensor integration using the Arduino pro...

Pogo pins make life so much easier when you are trying to program without having to solder a single thing, and when you attach them to an...

The SparkFun Lumenati 4-pack is a coin-sized board equipped with four APA102C LEDs surrounding the outer edge

The SparkFun Lumenati 90L is a small quarter-circle board equipped with three APA102C LEDs and a single mounting position

The SparkFun micro:bit Breakout is a board that connects to the BBC micro:bit and expands the capabilities of the development platform

Robots are fun, and the micro:bit is the perfect controller for learning how to build and program robots!

The SparkFun Mini GPS Shield equips your Arduino Mini with access to a GPS module, µSD memory card socket and all of the other peripheral...

The SparkFun OpenLog is an open source data logger

The SparkFun OpenPIR is a highly customizable Passive Infrared (PIR) sensor based around the NCS36000 PIR controller

The SparkFun OpenScale is a simple-to-use, open source solution for measuring weight and temperature.

The SparkFun Photon Wearable Shield makes it easy to add the WiFi enabled Photon to any wearables project. Each pin on the Photon is brok...

The SparkFun Photon Weather Shield is an easy-to-use add-on board that grants you access to barometric pressure, relative humidity, and temp

Do you own a Raspberry Pi? Have you always wanted to use it to set up your very own gaming station? The SparkFun PiRetrocade provides you...

The Pro Micro is similar to the Pro Mini except with an ATmega32U4 on board.

At SparkFun we continually like to innovate, update, and improve even when it comes to our very own development boards. The SparkFun RedB...

The SparkFun RedBot Mainboard is a robotic development platform that works with the Arduino IDE. The RedBot is a motor driver and Ardiuno...

The Accelerometer sensor is an add-on for your RedBot that provides bump and motion detection. The sensor works by measuring acceleration...

The SparkFun Serial Controlled Motor Driver (SCMD) is a DC motor driver that’s been designed to drive small DC motors with ease. The SCMD...

The SparkFun Servo Trigger is a small robotics board that simplifies the control of hobby RC servo motors. When an external switch or log...

The SparkFun AS7263 Near Infrared (NIR) Spectral Sensor Breakout brings spectroscopy to the palm of your hand

The SparkFun Stepoko is an Arduino compatible, 3-axis control solution that runs grbl software and is able to connect to your computer to...

The SparkFun THAT 1206 InGenius Breakout Board offers an easy solution to adding a balanced audio input to your circuits

Are you frustrated with the lack of dexterity from most third hands? The SparkFun Third Hand gives you the ability to hold a board betwee...

The TRS (tip ring sleeve) jack breakout is a simple board that allows a ¼" stereo audio jack to be soldered on to gain easy access

The SparkFun Weather Shield is an easy-to-use Arduino shield that grants you access to barometric pressure, relative humidity, luminosity...

The SparkFun Wireless Motor Driver Shield is designed to make connecting motors, sensors and other components easy.

This Spindle/Router LED Light Ring is designed to fit our Router/Spindle Mount.

Navigate a maze. Program a painting. Mimic the solar system. Swim across the water. Have a dance party… The only limit is your imagination.

Adds durable steel threads in wood and particleboard. Great for builds that need hold downs like the Ox.

STEMLab 125-14 has 14bit input / output channels for highly accurate measurement results in professional environments.

An open source stereoscopic camera based on Raspberry Pi

BlueCoin Starter kit

Turn your Raspberry Pi into a professional server

Turn your Raspberry Pi into a professional server

Advanced Universal Digital Input (ADC081C021)

Create electronic music by building your very own synthesizer.

The TB1100 is a DB9F-to-terminal block adaptor.

The TB1100 is a DB9F-to-terminal block adaptor

Open-source. Hackable. Internet controlled. This kit allows you to build your own Telepresence robot out-of-the-box in a matter of minutes

Real-time temperature monitoring.

A precise ambient temperature measurement device

A photo relay coupled MOSFET