Hardware and Software products

Talk to the world!

A collection of easy-to-use software and tools enabling rapid development of Infineon MCUs

MSP430 LaunchPad Value Line Development kit

Our favorite part of the Flora platform is these tiny smart pixels.

Cellular IoT for single board computing, made simple. Use with Raspberry Pi, Beagle Bone, CHIP and others.

Here is a very simple breadboard power supply kit that takes power from a DC wall wart and outputs a selectable 5V or 3.3V regulated volt...

Google Maps APIs are available for Android, iOS, web browsers and via HTTP web services.

LIGHT is a light sensor unit with an adjustable resistor that can detect the lightironmental light intensity.

Gives users the ability to create all-in-one, integrated projects such as tablets, infotainment systems and embedded projects.

It’s blue! It’s thin! It’s the Arduino Pro Mini! SparkFun’s minimal design approach to Arduino. This is a 3.3V Arduino running the 8MHz b...

This shield with PoE module allows an Arduino board to connect to the internet.

The SparkFun Load Cell Amplifier is a small breakout board for the HX711 IC that allows you to easily read load cells to measure weight.

Make anything with EAGLE PCB design software. Professional power for every electronics designer.

Cloud IoT Core is a fully managed service that allows you to easily and securely connect and manage millions of devices.

The one and only Apple phone.

The Arduino Nano is a small, complete, and breadboard-friendly board based on the ATmega328 (Arduino Nano 3.x). It has more or less the s...

It’s the end of the world, and you need a button to press. This is it. A 100mm diameter (outside diameter) dome illuminated push button c...

This is an Arduino Temperature Sensor based on LM35 temperature chip. A Temperature Sensor can be used to detect ambient air temperature.

This is the OpenBuilds custom NEMA 17 Stepper. This little motor packs a powerful punch at 76 oz of torque! Extra Long Wires!!

Intuitive and Powerful Ground Control Station for PX4 and ArduPilot UAVs

This is the newest revision of our FTDI Basic. We now use a SMD 6-pin header on the bottom, which makes it smaller and more compact. Func...

A bare PCB that is the exact size as our mini modular breadboards with the same connections to pins.

Make connections, not silos. Connect all your devices and services, even those that haven’t been invented yet.

This Dust Sensor gives a good indication of the air quality in an environment by measuring the dust concentration.

balenaCloud is a modern development and deployment workflow for the Internet of Things.

BeagleBoard-xM delivers extra MIPS with 1-GHz ARM® Cortex™-A8 performance and extra memory with 512MB of low-power DDR RAM

TensorFlow Lite is a set of tools to help developers run TensorFlow models on mobile, embedded, and IoT devices.

DC POWER JACK 2.1MM BARREL-TYPE PCB MOUNT

Get started with the GNAT development environment.

The product includes an on-board voltage regulator which gives it an operating voltage range of 3.3 ~ 5.5V.

MPLAB X is Microchip’s full-featured IDE software package. Now supporting both PIC and AVR product lines.

Equipped with a 2.8-inch touch screen and Type-C cable, the hassle-free setup of UNIHIKER allows you to directly connect hundreds of sensors

tiny MCU board with Wi-Fi and BLE, battery charge supported, power efficiency and rich Interface

AWS Identity and Access Management (IAM) enables you to securely control access to AWS services and resources for your users.

Consist of two independent, high-gain frequency-compensated operational amplifiers designed to operate from a single supply or split supply

Place PCB/PCBA order here: seeedstudio.com/fusion_pcb.html

Notecarriers are companion development boards designed to make it easy to prototype and deploy IoT solutions with the Notecard.

Facilitates the optimization and deployment of Deep Learning models using popular frameworks for GenAI, LLMs, Computer Vision, and more...

Cloud Platform for the Internet of Things

A scalable real-time operating system (RTOS) supporting multiple hardware architectures, optimized for resource-constrained devices.

Make your projects rock solid with the Prototyping Shield. It allows you to design custom circuits for products with the UNO footprint.

Add WiFI to your devices with the Arduino Uno WiFi. It's an Arduino Uno Rev3 with more kick: It comes with 4809 and IMU

AWS IoT EduKit makes it easy for developers to receive hands-on experience building end-to-end IoT applications.

FPGA engineering projects created by Adam Taylor

Requires low-voltage and low current signals to control those switches

Create Smart IoT Sensor Devices Rapidly. Reduce Data Science Complexity.

A high-quality GPS module that can track up to 22 satellites, with a high-sensitivity receiver, built-in antenna, and lots of goodies!

CircuitMaker is a free PCB design tool with zero limits that removes traditional barriers in the PCB design process.

The Hologram Global SIM Card allows you to connect you IoT device everywhere. Paired with a powerful device management platform and API.

The nRF5340 DK has a dual-core Bluetooth 5.2 SoC supporting Bluetooth Low Energy, Bluetooth mesh, NFC, Thread and Zigbee

A combination of both the Pulse Oximeter and Heart rate in one medical device

The new soil moisture sensor uses Immersion Gold which protects the nickel from oxidation.

This I2C digital humidity sensor is an accurate and intelligent alternative to the much simpler SHT15 Breakout.

Flight Management Unit (FMU) running PX4, the largest commercially deployed open-source drone software stack for Drones and Rovers

Arduino base shield to connect to all grove sensors

Add an ear to your project with this well-designed electret microphone amplifier.

It is a wireless LAN programmable board embedded with a PHPoC interpreter. It supports various interfaces to connect with sensors

A Blocks to Javascript editor for the micro:bit

A breakout board for the L298N full-bridge dual motor driver; which comes in a staggered, Multiwatt package.