Hardware and Software products

Educational robotics kit for building your own customizable linux-based Mobile Inverted Pendulum (MIP)

Chip L298N, Dual H bridge drive (can drive 2 DC motors), driving ability, low heat, strong anti-interference ability.

The Embedded Tile provides developer with a risk free way of integrating a Spartan 7 in their design without the worry of designing a chip

It is a development kit based on an AM335x processor which integrates an ARM Cortex™-A8 core operating at up to 1GHz.

Continuously stream temperature, humidity, pressure, and movement data using dim light.

It is an ePaper Driver Board for XIAO, featuring a 24-pin FPC connector, charging IC, and BAT connector, ideal for Wi-Fi digital frames.

The Erle-Copter DIY drone kit provides a low cost pack to build yourself your own Linux drone step by step.

The SIGFOX shield evaluation board demonstrates the AX-SFEU, a single chip solution to create an ultra low power node on the Sigfox network.

Embedded peristaltic dosing pump kit

FireBeetle Covers-Gravity I/O Expansion Shield is an adapter for Gravity sensors and modules.

The M5CameraF is a camera unit based on ESP32 chip and OV2640 including PSRAM, 160° Fisheye Lens.

FreeSoC2 Development Board, SparkFun’s take on the PSoC 5LP ARM Cortex-M3 and delivers it as an Arduino compatible kit.

gen4 5.0" Diablo16 Intelligent Display Module Resistive Touch, without Cover Lens Bezel

This is a dissolved oxygen sensor kit, which is compatible with Arduino microcontrollers.

It is used to detect orientation. Inside the sensor, there is a ball that make contact with the pins when the case is upright. 

You can directly plug it on our IO Expesion Shield V7. Just vibrate this sensor, Arduino can receive a digital signal.

heart rate monitor sensor, simple and low-cost

This Gravity: I2C HUB module is designed to connect up to 8 I2C devices to the main controller.

Visit the GreenPAK Applications page to access 250+ application notes

The Grove - 10A DC Current Sensor (ACS725) is a high precision DC current sensor based on ACS725.

The Grove - 12 Key Capacitive I2C Touch Sensor V2 (MPR121) is a multichannel proximity capacitive touch sensor.

This 3-axis Accelerometer module is based on MMA7660FC with Digital Output I2C.

The Grove - 3-Axis Digital Accelerometer ±40g (ADXL357) is a digital output MEMS Accelerometer.

The Grove - I2C High Accuracy Temperature Sensor(MCP9808) is a high accuracy digital module based on MCP9808.

I2C Hub Grove is an extension Grove module for connecting multiply I2C devices to Grove Base Shield

Based on MPU-9250 and BMP280. which combines a 3-axis gyroscope, 3-axis accelerometer, 3-axis magnetometer and a Digital Motion Processor

Instead of using coil, packaged solid-state relays(SSR) use power semiconductor devices such as thyristors and transistors

HEX is a hexagon RGB LED unit built in 37 RGB.

Single high-speed voltage comparators

Raspberry Pi with pre-installed bc-raspbian together with Radio Dongle

This super ICE Tower CPU Cooling Fan for Raspberry Pi is burned for solving heat dissipation problem!

Cyclone V FPGAs provide lowest system cost and power, along with performance level, ideal for differentiating high-volume applications.

Designed to get student ready for Industrial IoT applications

The JeVois-A33 smart machine vision camera combines a camera sensor, embedded quad-core computer, and USB video link in a tiny package.

Description: The ProtoSnap series is a new way to prototype your project without a breadboard. Everything is wired together on a single b...

This is the LilyPad Rainbow LED strip, with seven LilyPad LEDs that are still attached to one another.

The complete kit to assemble and start training your LittleArm

LoRa Arduino Shield is an extension for Arduino to send data over long distances with extremely low data consumption.

14 SIZES! Compared to most screws, they are ultra low profile. This means plenty of clearance.

The Lux Meter Tag uses a high dynamic range light intensity sensor OPT3001 that can measure illuminance from 0.01 to 83,000 lux.

M5GO Lite is a small kit which consists of one ENV unit, a M5Core(based on ESP32 chip) and a M5GO bottom. It’s a simple version of M5GO KIT

Send - receive data using web requests REST/SOAP, SSL Secure connections, 10 data channels, unlimited values, shared resources

Ultra-Low Power, Single Channel Integrated Biopotential (ECG) AFE with HR Detection Algorithm (R-R)

An integrated sensor platform that helps customers evaluate Maxim's complex and innovative medical and high-end fitness solutions.

WEIGHT is a metering unit that integrates an ADC chip dedicated to the scale design.

The Base securely holds four Modulos and connects them together. Need more than four? You can daisy chain Bases for larger projects.

MSP430FR5969 FRAM LaunchPad Development Kit

DevKit with sensors on board, Microsoft Azure IoT connectivity ready, Arduino-compatible

Arduino boards are compatible

2kg Payload Commercial 6 Dof Cobot

The NPi i.MX6ULL Dev Board is a low power consumption Linux single board computer built around the powerful NXP i.MX6ULL

*DISCONTINUED* The nRF24 Module is used for wireless communication without WiFi. It's great for low-power mesh communication between Tess...

ObjectBlocks IOT Platform consists of a visual programming interface and data dashboard for IOT products

ObjectBlocks is an Arduino shield that provides bluetooth and Wifi capability - and works seamlessly ObjectBlocks IOT platform.

OpenCV AI Kit (OAK), an MIT-licensed open source software and Myriad X-based hardware solution for computer vision at any scale.

Otto is truly Opensource, Arduino compatible, 3D printable the perfect opportunity to build and have your very first robot

The Pantri API is the place to send grocery replenishment data to, from whatever Smart device you can dream up!

Current monitoring of your AC power load is now possible from anywhere in the world using the Particle Electron cellular cloud communication