Hardware and Software products

Why would you need a 24-bit ADC? When 16-bit is just not enough. If you require high precision analog measurements, this gets the job done.

The perfect portable enclosure for mini electronics. And sometimes breathmints.

AMD Zynq™ 7000 SoC ZC702 Evaluation Kit

Apple's watch, with modern design and futuristic smarts.

Arduino Gemma is a miniature wearable microcontroller board based on the ATtiny85.

Can be recognized by computer as a mouse or keyboard

Everything you need to start with your next IoT project

Endless possibilities, powerful processor functionalities.

The Arduino Nano is a small, complete, and breadboard-friendly board based on the ATmega328 (Arduino Nano 3

The perfect board for your IoT projects

An Arduino which is IoT ready.

DRV8301 BoosterPack

The MXP Breadboard provides a 300 tie breadboard & 50 tie bus bar on an expansion card compatible with the myRIO Expansion Port (MXP).

Use to trigger various actions

The Signaloid C0-microSD is a hot-pluggable co-processor module in a microSD form factor, based on the popular Lattice iCE40 chip.

DSPs from Texas Instruments

CC3220SF LaunchPad

Kit with 4 enviromental sensors - temperature, humidity, light intensity and atmospheric pressure. You can use it e.g. as Weather Station.

A gas sensor for measuring the carbon dioxide (CO₂) concentration

An accurate probe for general pH measurements.

Create programmable projects with conductive tape on a brick building system or as a wearable with conductive thread!

Dabble - One App for Sensing & Control that simplifies project-making, wireless hardware control, sensing, IoT & much more.

Portable Logic Analyzer and Digital Pattern Generator

Laboratory grade probe for measuring dissolved oxygen (DO).

Designed for use with 2-phase hybrid stepper motor of all kinds with 42mm to 86mm outside diameter and less than 4.0A phase current.

Eddystone is an open beacon protocol that defines a Bluetooth low energy (BLE) message format for proximity beacon messages.

Educational robotics kit for building your own customizable linux-based Mobile Inverted Pendulum (MIP)

TM4C129 Crypto LaunchPad

Chip L298N, Dual H bridge drive (can drive 2 DC motors), driving ability, low heat, strong anti-interference ability.

This is an embedded thermal printer, which is widely used in various occasions, such as supermarkets, convenience stores, post office, bank

It is a development kit based on an AM335x processor which integrates an ARM Cortex™-A8 core operating at up to 1GHz.

Continuously stream temperature, humidity, pressure, and movement data using dim light.

The Erle-Copter DIY drone kit provides a low cost pack to build yourself your own Linux drone step by step.

The SIGFOX shield evaluation board demonstrates the AX-SFEU, a single chip solution to create an ultra low power node on the Sigfox network.

The SGP40 Air Quality sensor adopts the new SGP40 digital VOC sensor chip launched by the well-known Sensirion.

FireBeetle Covers-Gravity I/O Expansion Shield is an adapter for Gravity sensors and modules.

FreeSoC2 Development Board, SparkFun’s take on the PSoC 5LP ARM Cortex-M3 and delivers it as an Arduino compatible kit.

The Gear Stepper Motor Driver Pack includes a stepper motor and a motor drive board.

gen4 5.0" Diablo16 Intelligent Display Module Resistive Touch, without Cover Lens Bezel

This is an Arduino CO/Combustible Gas sensor. It uses MQ-9 to dectect Carbon Monoxide.

This is a dissolved oxygen sensor kit, which is compatible with Arduino microcontrollers.

An analog output pH monitoring meter.

This UV Sensor with GUVA-S12SD chip is suitable for detecting the UV raditation in sunlight.

This arduino digital capacitive touch sensor provides a one-touch style switch on your Arduino project.

It is based on Bosch BMI160 6-axis MEMS sensor which integrates 16-bit 3-axis accelerometer with ultra-low-power 3-axis gyroscope.

This 3-axis Accelerometer module is based on MMA7660FC with Digital Output I2C.

The Grove - ±5A DC/AC Current Sensor (ACS70331) is a high precision DC/AC current sensor based on ACS70331.

Based on MPU-9250 and BMP280. which combines a 3-axis gyroscope, 3-axis accelerometer, 3-axis magnetometer and a Digital Motion Processor

10 Leds Arduino Library Easy-to-Use

The Grove-Mech keycap is a mechanical switch with a build-in LED. The 255 full color RGB LED makes it simple and easy to show the statues

Instead of using coil, packaged solid-state relays(SSR) use power semiconductor devices such as thyristors and transistors

Single high-speed voltage comparators

Raspberry Pi 3 B/B+ microSD card image. Standard Raspbian with added MQTT, Node-RED and Radio Gateway.

Raspberry Pi with pre-installed bc-raspbian together with Radio Dongle

In this design, we dedicated the last GPIO (GPIO.3) to a buzzer for alarm notification applications.

Designed to get student ready for Industrial IoT applications

The JeVois-A33 smart machine vision camera combines a camera sensor, embedded quad-core computer, and USB video link in a tiny package.

Kinetis KW41Z is supported by a rich set of software enablement, including MCUXpresso Software and Tools.

A high-intensity laboratory-grade probe for measuring pH.