Hardware and Software products

The RN2483 is a fully-certified 433/868 MHz module based on wireless LoRa® technology.

RoboCORE is a Husarion cloud-enabled robotic controller with one purpose: build advanced robots as fast as possible.

The RobotGeek IR Transmitter can send data to various devices in your sights!

64-bit 4K60P HDR Single Board Computer: Gigabit, USB 3.0 and up to 4GB LPDDR3

The Multipurpose sensor can detect open/close, vibration, orientation, angle, and temperature all in one.

Screenly OSE is the oldest and most popular open source digital signage platform for the Raspberry Pi.

IMU 9DOF

TI Micrcontrollers with integrated wireless connectivity

Invest once in the SimpleLink software development kit (SDK) and use throughout your entire portfolio with 100 percent code portability.

Gesture Sensor (APDS-9960)

Smart RS232 Board is a Smart Expansion Board for PHPoC Shield, which help Arduino communicates with RS232 devices

An SMA to Alligator Clip Cable for a clean signal connection.

Third generation extremely low power SODAQ ONE board with a nifty feature that allows it to stay in sleep mode until it moves.

Extra rechargeable lithium polymer smart battery for the 3DR Solo; charger not included.

Use data collected in SORACOM Harvest to create dashboards combining multiple graphs, tables, maps and more

Take the SoundTouch® experience to the next level.

The SparkFun 9DOF MPU-9150 is the world’s first 9-axis MotionTracking MEMS device designed for the low power, low cost, and high performa...

This is a motor shield for Arduino that will control two DC motors

Your 5V system can wield great power with this big, beefy relay board. How does 10A on the NC contacts and 20A on the NO contacts at 220V...

The Intel® Edison is an ultra small computing platform that will change the way you look at embedded electronics. Each Edison is packed w...

The Digital Sandbox (DS) is a learning platform that engages both the software and hardware worlds. It’s powered by a microcontroller tha...

This breakout for the Silicon Laboratories Si4703 FM tuner chip is a little more stripped down than our FM Tuner Evaluation Board. If you...

Turn your Arduino into a position-tracking, speed-monitoring, altitude-observing wonder logger.

56 red LEDs arranged in a nice 8x7 grid. Requires eight pins, while the library supports any ATmega 168 and 328-based Arduino device.

The SparkFun MIDI Shield board gives your Arduino-based device access widely used and well supported MIDI communication protocol

The SparkFun Mini Inventor’s Kit (SMIK) is a great way to get started with programming and hardware interaction with the Arduino programm...

The SparkFun RedBoard Qwiic is an Arduino-compatible development board that uses a few of the features that we have loved about Arduinos

The smallest and easiest to use serial conversion circuit on the market! This board has one purpose in life - to convert RS232 to TTL and...

If you’re ready to step your Arduino game up from older 8-bit/16MHz microcontrollers, the SparkFun SAMD21 Dev Breakout is a great landing...

The SparkFun MAX31855K Thermocouple Breakout is a simple 14-bit resolution, SPI-compatible, serial interface thermocouple digitizer that ...

We have no idea what USB device you're hooking up to, but if you need to add a miniUSB/USB Mini-B connector to your breadboard - here it is.

This is the latest version of our Venus GPS board; the smallest, most powerful, and most versatile GPS receiver we carry. It’s based on t...

This is the SparkFun XBee Explorer Dongle unit for the Digi XBee module line. With the XBee Explorer Dongle you can plug the unit directl...

Stepper Motor Controller is a Smart Expansion board for PHPoC Shield, which is designed to smoothly and precisely control a step motor.

A modular stand-alone debugging and programming probe for the STM8 and STM32 microcontrollers

The HAL connects the hardware of InOut with high-level software via USB and Slots

This adapter is used to program the TinyLily Mini Processor, enabling the processor's footprint to be even tinier in projects!

A tiny mighty ESP32 development board.

TinyScreen is a beautiful color OLED display for your TinyDuino system. Create video games, a video player, or your own smart watch!

This TinyShield allows you to connect your TinyDuino system to any compatible iOS or Android (4.3+) device using Bluetooth Low Energy.

This TinyShield lets you add a battery-backed real-time clock (RTC) to your TinyDuino projects.

Low power timer with an integrated MOSFET driver designed for power gating in duty cycled or battery-powered applications.

Exclusive 1.38" Round TFT LCD

The XUP-USB programming cable is compatible with Xilinx's Platform Cable USB.

The RFID Card is a 13.56MHz RFID / NFC card with the M5Stack logo.

15.6" LCD for UDOO DUAL and UDOO QUAD - LVDS connection

Open Source Wi-Fi connected IoT Button

ACC is a motion sensor Unit. Integrated with ADXL 345, ACC is able to obtain 3- axis of Acceleration.

DFRobot 3D gesture sensor is an interactive sensor that integrates 3D gesture recognition and motion tracking.

4PDT | ON-ON | Latching | Solder Lugs | Long Lasting | High Quality

This cape features a compact 5 inch LCD for Beaglebone Green or Beaglebone Black.

The 7'' LCD CAPE which features a 7.0 TFT LCD 800x480 resolution display, is a cape specifically designed for the Beagle Bone Black (BBB).

The enclosure provides slots to access the Grove, USB ports, Ethernet, SD card, HMDI, and JTAG connectors as well as feet and vents.

The CC3000 hits that sweet spot of usability, price and capability.

A speedy little microcontroller with lots of GPIO pins and 64 times more RAM than the Apollo Guidance Computer.

The fastest, most powerful Metro ever

Design your own Bonnet or pHAT, attach custom circuitry and otherwise dress your Pi Zero with this jaunty prototyping Bonnet kit!

The perfect portable enclosure for mini electronics... made even smaller!