Hardware and Software products

M5Stack Official Experimental Proto Board Set included DHT12 Bus Socke Grove Cable for ESP32 Basic Kit & Mpu9250 Kit for Arduino

The FAN54110 is a USB-compatible single-cell, linear Li-Ion charger with support for Dead Battery Provision (DBP).

Aaware gives you 13 microphones out of the box, with exceptional performance.

The world's smallest open-source wireless IMU/LPS platform. 100% Arduino compatible.

The STMicroelectronics VL6180X Time of Flight Ranging Sensor embeds ST’s patented FlightSense™technology

Wanna buy a simple & practical voice recorder? This one is right for you! The voice recorder module supports 4 controlling modes.

A tiny Gadgeteer board running .Net Micro Framework

FEZ Raptor is a .NET Gadgeteer-compatible Mainboard.

This fingerprint module could work alone without any principal computer or any PC software. It could store 1000 fingerprints.

FireBeetle 2 ESP32-S3 is a high-performance main controller built around the ESP32-S3-WROOM-1-N16R8 module. (Wi-Fi & Bluetooth on Board)

The flanged lip on this Bearing will catch on the outside of a 16mm hole on any plate. Eliminates the need for recessed holes.

Perfect for concealing your electronic wires (wire management).

Get started with the fabulous Adafruit Flora platform with this lovely budget kit, just enough to start with this fun wearable computer.

Four 14-segment displays that you can use to display text, numbers, and a host of other characters.

FOVEA is a wearable embedded analyzer -- a multimeter targeted at embedded electronics with wrist-worn convenience.

The FPGA Expansion Pack for Xilinx Vivado makes it easy for you to use the cloud. The plugin adds cloud access functionality right into your

gen4 7.0" Diablo16 Intelligent Display Module non Touch, Cover Lens Bezel

Gest is the most accurate gestural interface to date.

Glass Panel Repair Kit It is an M5Core external screen replacement kit

Enables the design of cellular connected IoT edge devices that can operate in multiple countries

This Gravity Analog 20A current sensor is based on the Hall current sensing principle.

This is a breakout board for the fully integrated Hall Effect based linear ACS758 current sensor.

DFRobot Gravity: analog electrical conductivity sensor/meter(K=10) is particularly used to measure the high electrical conductivity liquid,

The concentration of carbon dioxide (0.03% usuallly) is related to daily life.

It is an electric switch that is actuated by very little physical force.

Sharp GP2Y1010AU Dust Sensor requires some wiring on the breadboard and a list of components to make it Arduino compatible.

The Formaldehyde (HCHO) sensor is an Arduino & Raspberry Pi compatible module, which is the ideal solution for indoor air quality monitor.

PT100 is suitable for most of the temperature measurement below 400°C

This module is a 2 digit alphanumeric display with high brightness and red backlight, each digit is consists of a 14-segment digital tube.

This module is a 4 digit alphanumeric display with high brightness and red backlight, each digit is consists of a 14-segment digital tube.

The Grove - 2.5A DC Current Sensor(ACS70331) is a high precision DC current sensor based on ACS70331.

This is based on Texas Instruments(TI) LDC1612, a 28-bit inductance to digital converter(LDC) for inductive sensing solutions.

The Grove - 3-Axis Analog Accelerometer ±20g (ADXL356B) is a analog output MEMS Accelerometer.

The Grove - 3-Axis Analog Accelerometer ±40g (ADXL356C) is an analog output MEMS Accelerometer.

This a wide dynamic range, 6-Axis Miniature MEMs sensor, which includes a a triaxial gyroscope and a triaxial accelerometer.

The Grove - 6-Position DIP Switch has 6 individual switch positions, which use I2C to transmit date.

Grove - Adjustable PIR Motion Sensor is an easy to use Passive Infrared motion sensor, which can detect infrared object motion up to 3 meter

Grove - Adjustable PIR Motion Sensor is an easy to use Passive Infrared motion sensor, which can detect infrared object motion up to 3 meter

The Grove Beginner Kit for Arduino is one of the best kits for beginners to get started with Arduino.

The Grove - SCD30 is a 3-in-1 Arduino sensor that can measure CO2, temperature, and humidity. Based on Sensirion SCD30, it is a Non-Dispersi

The Grove-Dry-Reed Relay is a relay module which works through magnetizing the vibration reed via the current in the coils.

Grove – Heelight Sensor is a smart voice sensor that can recognize up to 500 digital voice commands.

The Grove - Human Presence Sensor can be used to detect the presence of a human body or any other infrared objects.

Intel and Microsoft have partnered to create a kit for rapid prototyping commercial gateway scenarios.

LED Matrix is low cost and usually used to display simple numbers and images.

Grove - MP3 v2.0 is a tiny-size and compact audio module which includes shuffle and play of audio files such as WAV and WMV.

Build your own smart devices.

8x8 RGB LED Matrix is awesome for simple image display, 64 pixel leds and 255 colors for each pixel means almost infinite possibilities.

Most of the MCUs use TTL levels, and the computer serial port generally uses 232 levels.

This is an ultralow noise, high frequency, high G, industrial grade MEMS accelerometer sensor.

Grove Starter Kit for LinkIt ONE is a theme package for IoT (Internet of Things). It is designed to help you get an idea of IoT city and tur

An open-source, ready-to-use tool set optimized for simplicity and rapid prototyping.

This is a high-quality aluminum timing pulley that is perfect for your automation projects!

More aggressive teeth than its little brother the GT2, so this can be used in higher torque applications.

A high-quality aluminum timing pulley. With more aggressive teeth, it can be used in higher torque applications.

A touch screen-ready BeagleBone Black cape with WiFi and Bluetooth.

A WiFi and Bluetooth-enabled cape for The BeagleBone Black SOM.

Flash your Raspberry Pi Compute Module with this compact expansion board.

Expose Every Compute Module Pin