Hardware and Software products

Enter the automotive CAN bus world with this shield

The first Arduino on wheels, the easiest way to get started with robotics.

The Arduino Sensor Kit is a joint electronics starter kit from Seeed and Arduino. It integrates 10 commonly used electronics modules on one

Arduino TIAN unleashes the power of a small computer running Linux connected to a 32-bit microcontroller

Quick and Easy way to develop IoT Projects

A simple way to define an ASIC from an existing set of lego blocks

Lower-cost option, balancing power and performance for gateways, display-based applications.

Great performance for high-end gateways with local processing and analytics, and for multimedia applications.

The Arty Pmod Pack was designed to compliment features of the Arty FPGA board, allowing users to expand project possibilities!

The Atlys circuit board is a complete, ready-to-use digital circuit development platform based on a Xilinx Spartan-6 LX45 FPGA.

Executes powerful instructions in a single clock cycle, balancing power consumption and processing speed.

Innovative new System-on-Module IoT solution

Avnet’s AT&T IoT Starter Kit Powered by AWS enables designers to easily develop and prototype cellular connected IoT devices.

Enables designers to rapidly prototype cellular connected IoT devices

This music amplifier is a dual BTL class-D, able to deliver up to 2x25w into 8 ohm speakers,

Delivers a robust API and app that helps you secure users and future proof your business.

IoT Dashboard for environmental monitoring and control

A web service that uses Hadoop, an open-source framework, to quickly & cost-effectively process vast amounts of data.

This Balldriver Screw Driver Set will be your "Go To" Tool Set in your workshop.

Painless Device Management for IoT: - OTA - Segmentation - Monitoring and alerting

A clean and robust mounting system for your Raspberry Pi and Pi-Plates.

Core BOTTOM is a base ofM5Core GRAY kit.

HTTPS Server without a public/static IP. TLS Tunnels with decentralized credentials.

SHIELD Multiprotocol and Multifunctional

Ever wanted to build your robotic car with tiny body and smooth control?

Corner connector with a 90 degree angle.

BlinkM is an I2C Smart RGB LED designed for Arduino.

BlinkyTape is a super-cool LED strip with full-color RGB LEDs and an integrated controller.

C5545 BoosterPack

LaunchPad developers can use this BoosterPack to start developing remote control applications.

CC1125 BoosterPack

DFRobot’s Boson starter kit for micro:bit includes 8 well selected modules, covering most popular digital and analog sensors and actuators,

The first Banana Pi which follows the Linaro 96Boards

The Breadboard Breakout is designed to be used with the Analog Discovery to provide a secure connection with any breadboard.

Easily connect to the Crazyflie 2.0 expansion port when developing new hardware

Bright White and IR Camera Light for Raspberry Pi

This is a Universal Build Plate. It is universal because it can adapt to most all build configurations. So, it's very modular in nature.

This is an upgrade of old Butterfly. In comparison, this new launcher has packed with a microprocessor MEGA328 and 18 RGB LEDs

This is a translucent silicon rubber button pad with 4 buttons orignally inspired by the folks at monome.org

2 coin batteries Arduino compatible (328P 8MHz) multisensors LoRa RFM95/69 radio on board. Temperature/Humidity/Light/Pressure/Magnet/Gyro.

DSPs from Texas Instruments

Cellular IoT module supporting LTE Cat 1bis

This DFRobot touch kit comes with three types touch sensors.

These are standard 20mm x 20mm x 17mm (with a 4mm wide T-slot tab), used to connect (2) V-Slot or 20 Series T-slot aluminum extrusions.

C Back Driver is a steering gear drive board compatible with M5StickC

High quality aluminum plates with multiple taps and recessing to ensure easy assembly of the C-Beam Linear Actuator.

A gantry plate designed to give a clean and compact look; able to ride inside of the C-beam Linear Rail System using Mini V Wheels.

This C-Beam Double Wide Gantry Plate is designed to provide a stronger, more stable platform for your Builds.

Designed to be a super-strong universal gantry solution, mates at 90 degrees to another plate for easy builds.

The C-Beam Gantry Set makes building your project easy with one complete kit!

Utilize the power of beams in your builds!

Create custom plates! Easy to Assemble CNC Machine!

C-Beam Riser Plates allow you to add a C-Beam Shield to your actuators by raising the mounting surface up above the shield.

Protects C-Beam from debris in the transmission trough. Provides a clean, finished look to your C-Beam Actuator.

Modern, standard, & enhanced C++ for beautiful native UI tools, and cross-compilation to Windows, macOS, iOS & Android

Everything you need to start building your GR8 product.

Enable rapid development of fan applications

If you're looking for a food safe silicone tube solution for our DC Liquid Pump or Water Valve, or a better alternative to standard US 1/8"

USB to CNC is now a reality! CNC motion controller is a link between personal computer and drivers for stepper motors.

Available in commercial or industrial operating temperature options