Hardware and Software products

This an application-level module, which implements a motion & robotic control and it is totally customizable with different length.

Joystick HAT is one of the HAT module that is specifically designed for M5StickC.

Hat PIR is an M5StickC compatible human body induction sensor, it belongs to “Passive pyroelectric infrared detector”

PROTO_HAT is a HAT size of universal prototyping board.

PROTO PLUS HAT is a universal proto board compatible with M5SticKC.

YUN HAT is a cloud-shaped multi-function environment information measurement base.

M2 is an open source automotive interface that can take your car to the next level.

Starter Kit + Maker Board helps you start coding and making projects with no wires or resistors, and no hassle. Hack our pre-written code!

Essential for control of your project, this range of variable resistors and switches are ideal for taking control.

It is the smallest ESP32 board now. And It uses Espressif Sip ESP32-PICO-D4 chip, which has two cores, up to 240MHz for WiFi and Bluetooth.

It's compatible with Leaf Maple. It's a mini version. It only need 10$. And It supports Arduino IDE. It's cool to program it with Arduino

A Hiwonder AI Vision Robot Arm with Mecanum Wheels Car Powered by Raspberry Pi Open Source Robot Car

Dual-Channel, Bidirectional Logic-Level Translator Designed Specifically for Low-Power Consumption

An Ultra-Low-Power ARM Cortex-M3 with Advanced Analog Front-End in an Arduino Form Factor

Provides a platform for leveraging the capabilities of the MAX78000 to build new generations of artificial intelligence (AI) devices.

Use custom instruments, audio effects, and MIDI effects in Ableton Live.

The MAXREFDES117# reference design is a low power, optical heart-rate module complete with integrated red and IR LEDs, and a power supply. I

The MAXREFDES89# is an mbed®-compatible, Arduino® form factor shield, ideal interface for anyone developing with brushed DC motors.

A little case to hold your mcMod120. Comes with an additional magnet enclosure (magnets included!) so you can use the built-in Reed switch

Designed for IP video surveillance, provides high endurance support for 3 years of high-quality, continuous 24/7 video recording.

Handy accessories to get you started with micro:bit!

An unashamedly old school LED matrix display board using the beautiful little Lite-On LTP-305 matrices.

Gives you multiple ways to mount your switches, adjustable along the length of the linear guide. Mounts to V-Slot or compatible extrusion.

Microsoft and SparkFun have teamed up to bring you some IoT (Internet of Things) fun. The Microsoft Azure IoT Starter Kit for the SparkFu...

This kit demonstrates a complete embedded display system, allowing for video output to an integrated 10-inch LVDS display.

The Breakout Carrier Card is the simplest, least expensive way to enable the PL I/Os on the MicroZed SOM.

The MicroZed Embedded Vision Development Kit builds on the MicroZed SOM by providing a video specific carrier card. The kit includes hard...

Small bearings that can fit a variety of projects, such as filament extruders. Standard 5mm ID bore.

Need to detach or debug your HAT? Then the Mini Black HAT Hack3r is for you!

Replacement smartphone/tablet holder for the the 3DR Solo controller.

This is a simple four wire cable. Great for jumping from board to board or just about anything else. There is a 4-pin Molex connector wit...

The momote001 is the first of many steps that will be given until it is completely feasible to the Internet reaches in anything.

a virtual assistant for developers to create their own voice enabled applications to interact with consumers in natural language

These mounting hubs are awesome for mounting, to gain a strong connection to a set screw locking shaft hub.

A cloudless Speech Recognizer / Voice Synthesizer for the Arduino platform

The original MPLAB Xpress Evaluation Board (p/n DM164140) features the versatile PIC16F18855 MCU, which supports a wide range of embedded...

The Pixhawk XRacer board family is optimized for small racing quads and planes with built-in wifi.

The MSP-EXP430FR4133 LaunchPad development kit is an easy-to-use evaluation module for the MSP430FR4133 microcontroller.

256kB of FRAM memory!

The Multi-Sensor Board enables prototyping of devices for asset tracking, wearables, smart home and other smart sensing devices. NOA1306

MyOctopus OPT 3001 Ambient Light Sensor (ALS) - Human Eye Precision : 0.01 lux to 83k lux - 12c: 0x44 0x45 0x46 0x47 -1.6 V to 3.6 V

NuGet with nanoFramework System.Net Class Library.

Linux autopilot on Raspberry Pi

The NCP110 offers a unique combination of very low voltage, low noise, high PSRR and low quiescent current.

Take your projects to the next level with more power and strength with this new high torque 345oz/inch NEMA23 stepper motor.

NeoDigito are the alternative for conventional seven-segment displays and LED matrix, mainly for big size displays.

MINI_PROTO is an M5Unit size of universal prototyping board. Smaller than the PROTO unit.

This product was replaced by a updated version NFC Shield V2

Node is a base as a intelligent node in the IOT.

Carrier board for Atlas Scientific EZO line of sensors.

The nRF9160 Feather is a true Feather, and then some, board.

This 8mm Acme Nut Block is a great choice for many projects requiring lead screw linear motion.

These microcontrollers simplify evaluation and development of motor control applications, without requiring deep motor control experience.

A laser-cut robot kitten that runs and learns from you.

This handy little locknut is included with each of our Wheel Kits. They are super affordable and will work with M5 screws.

SERVO DRIVER

A cute, connected, cephalopod camera to stick on your window or sit on your shelf!

The best IoT software platform that meets today's and tomorrow's clients requests for an end-to-end solution

Supports 3 major platforms. Can easily evaluate various sensing functions.