Hardware and Software products

The SparkFun MIDI Shield board gives your Arduino-based device access widely used and well supported MIDI communication protocol

A WiFi/Microcontroller development board in the Arduino form-factor for the Photon. Easy to use, powerful, and connected to the cloud.

The SparkFun Photon Weather Shield is an easy to use add-on board that grants you access to barometric pressure, relative humidity, and t...

The LIS3DH Breakout is a smart, low-power, three-axis, capacitive micro-machined accelerometer with 12 bits of resolution that you can us...

STEMLab 125-10 has 10bit input / output channels and is perfect for universities, students and makers.

StepperMotorYH42BYGH40-402A

Syntiant’s TinyML Development Board is the ideal platform for building low-power voice, acoustic event detection and sensor ML applications.

Tang Nano 9K FPGA is an exquisite development board based on the Gowin GW1NR-9 FPGA chip following the Tang Nano 1K and Tang Nano 4K. It com

This long-range TinyShield is set to operate at 433MHz and can transmit at up to +20dBm and is very easy to use.

The mcTrak330™ combines SIGFOX™, WIFI location, and long range mcAir™ Low Power LAN protocol into a compact location tracking device.

The uCAM-III (microCAM-III) is a highly integrated serial camera module which can be attached to any host system that requires a video camer

Quantify the worldwide safety environment through three main drivers: Resources and Institutions, Safety Frameworks, and Safety Outcomes.

We've stepped up our LED game! Unicorn HAT HD crams 256 RGB LEDs, in a 16x16 matrix, onto a single HAT. High-definition rainbow goodness!

DFRobot provides you with a compact and efficient 7.4V lithium battery USB charger, only the size and weight of an ordinary Gravity sensor.

Fully-featured integrated development environment (IDE) for Android, iOS, Windows, web, and cloud

A Coin-sized Linux Computer with WIFI

Water Detect click is used for detecting water and other electroconductive liquids. If the detection area is wet the output of Microchip'...

Perfect for anyone who loves tech, wants a new geeky challenge or build their own personal Internet of Things.

Wio Tracker (Wireless Input Output) is an open source gateway which enable faster IoT GPS solutions.

ESP32-Based Module with an XBee Form Factor

6LoWPAN device for Network and IoT applications, IPv6 native with a powerful Cortex M3 onboard.

1515 stands for 15mm * 15mm on the cross-section. Not like most other companies, M5Stack not just provide the highly productized learning bo

The 7'' LCD CAPE which features a 7.0 TFT LCD 800x480 resolution display, is a cape specifically designed for the Beagle Bone Black (BBB).

The CC3000 hits that sweet spot of usability, price and capability

Why would you need a 24-bit ADC? When 16-bit is just not enough. If you require high precision analog measurements, this gets the job done.

This is a multifunction air quality monitor that can be detected not only the concentration of particles and formaldehyde but also the value

The perfect portable enclosure for mini electronics. And sometimes breathmints.

AMD Zynq™ 7000 SoC ZC702 Evaluation Kit

Apple's watch, with modern design and futuristic smarts.

Arduino Gemma is a miniature wearable microcontroller board based on the ATtiny85.

Can be recognized by computer as a mouse or keyboard

Everything you need to start with your next IoT project

Endless possibilities, powerful processor functionalities.

The Arduino Nano is a small, complete, and breadboard-friendly board based on the ATmega328 (Arduino Nano 3

The perfect board for your IoT projects

By executing powerful instructions in a single clock cycle, this device balances power consumption and processing speed.

A decentralized network for the Internet of Trusted Things (IoTT) that enables privacy and returns the ownership of data back to its owners.

An Arduino which is IoT ready.

The MXP Breadboard provides a 300 tie breadboard & 50 tie bus bar on an expansion card compatible with the myRIO Expansion Port (MXP).

Use to trigger various actions

The Signaloid C0-microSD is a hot-pluggable co-processor module in a microSD form factor, based on the popular Lattice iCE40 chip.

DSPs from Texas Instruments

CC3220SF LaunchPad

Kit with 4 enviromental sensors - temperature, humidity, light intensity and atmospheric pressure. You can use it e.g. as Weather Station.

A gas sensor for measuring the carbon dioxide (CO₂) concentration

An accurate probe for general pH measurements.

Create programmable projects with conductive tape on a brick building system or as a wearable with conductive thread!

Dabble - One App for Sensing & Control that simplifies project-making, wireless hardware control, sensing, IoT & much more.

Portable Logic Analyzer and Digital Pattern Generator

Laboratory grade probe for measuring dissolved oxygen (DO).

Designed for use with 2-phase hybrid stepper motor of all kinds with 42mm to 86mm outside diameter and less than 4.0A phase current.

Eddystone is an open beacon protocol that defines a Bluetooth low energy (BLE) message format for proximity beacon messages.

Educational robotics kit for building your own customizable linux-based Mobile Inverted Pendulum (MIP)

TM4C129 Crypto LaunchPad

Chip L298N, Dual H bridge drive (can drive 2 DC motors), driving ability, low heat, strong anti-interference ability.

The Embedded Tile provides developer with a risk free way of integrating a Spartan 7 in their design without the worry of designing a chip

This is an embedded thermal printer, which is widely used in various occasions, such as supermarkets, convenience stores, post office, bank

It is a development kit based on an AM335x processor which integrates an ARM Cortex™-A8 core operating at up to 1GHz.

Continuously stream temperature, humidity, pressure, and movement data using dim light.

The Erle-Copter DIY drone kit provides a low cost pack to build yourself your own Linux drone step by step.