Hardware and Software products

The Tinusaur Starter 2 is the second edition of the beginners’ kit that will help you start with Atmel ATtiny85 microcontroller

A miniature 640x480px camera with built-in lens. Connects directly to Gumstix Overo COMs via 27-pin ribbon.

The TinyFPGA A2 board is a bare-bones FPGA board in a tiny form-factor.

Smaller than a stick of gum. Powerful Lattice ECP5 FPGA providing everything needed to drive a custom embedded system of your design.

The 16 Edge LED TinyShield allows some cool and easy LED indications using only five I/O signals

This TinyShield makes it incredibly easy to add audio support to your TinyDuino projects.

The Barometric Pressure TinyShield allows you to measure barometric pressure (and determine altitude) and temperature with your TinyDuino

This board lets you communicate wirelessly with your TinyDuino

The Circle Edge LED TinyShield uses only six I/O signals to create a wide variety of LED indications.

The Dual Motor TinyShield allows you to drive two independently controlled DC brushed motors from your TinyDuino

Hook your projects up to the internet with the WiFi TinyShield!

TLD5542-1 Battery charger, LED driver, voltage regulator shield for Arduino

Designed to evaluate relay driven DC Motor applications

Provides DVI display, 10/100baseT Ethernet, USB Host, USB OTG, USB console and Stereo Audio to any Gumstix Overo® COM

This Triple Axis Accelerometer with Bosch BMA220 is an ultra small triaxial, low-g acceleration sensor breakboard with SPI and I2C interface

TRS3122E BoosterPack

Try Viam is a free service that lets you remotely control a Viam Rover in our robotics lab for 15-minute sessions from wherever you are.

The TSYS02P is a single chip, temperature sensor. It provides factory calibrated data corresponding to the measured temperature. The data...

Thundercomm TurboX D845 Dev Kit is a high performance platform based on the top-tier Qualcomm Snapdragon 845 processor.

A USB to UART interface to be used with any base board compatible

The UCW Hive is an IoT hub allowing to control and manage IoT devices.

USB is a USB driver module which integrates MAX3421E(USB peripheral/host controller).

Experience and expand the power of open design with your own VEGAboard.

3.96port is a unit that aim to transfer GROVE interface to VH3.96-4Pin.

This 2x32 pin connector is perfect fro all of your VHDC needs!

VHDCI cable with male connectors on both ends, useful for connecting Vmods to VHDCI-equipped system boards.

The VmodMIB is a simple solution for interfacing additional peripheral modules and HDMI devices to VHDCI-equipped Digilent system boards.

The Vmod Wire Wrap (VmodWW) offers a ready-made solution for prototyping wire wrapped circuits as accessories to Digilent system boards.

Incredible Microphones. Built for the Road.

World's smallest and most capable AI autopilot.

The Universal V-Slot Gantry Plate was designed to fit on all standard V-Slot Linear Rail.

Wandboard Dual NEW REVISION with updated WiFi and Powermanagement IC. 

Wandboard Quad NEW REVISION with updated WiFi and Powermanagement IC.

Wandboard QuadPLUS NEW REVISION with updated WiFi and Powermanagement IC.

Wandboard SoloNEW REVISION with updated Powermanagement IC.

IRRATIONALLY FAST. IMPOSSIBLY REAL.

The Webduino Fly is an extension board for the Arduino UNO

Webduino Smart is a ground-breaking development board

Small form factor PCIe Gen3x2 NVMe SSDs in M.2 2242 and M2. 2280 sizes. Ranges in size from 128 to 512GB

The Performance of NVMe™ Flash in Shared Storage

SATA SSD in either M.2 or 2.5" form factor ranging in size from 256GB to 1TB

SN730 NVMe SSD with up to 3400 MB/s read speeds and capacities ranging from 256GB to 1TB

The Ultrastar Data102 is a next-generation hybrid platform for Software-Defined Storage that balances performance with cost.

The Next Generation Hybrid Platform for Software-Defined Storage

Power your Pi with a wide range of input voltages from 3 to 16V!

The WiLink™ 8 Wi-Fi®, Bluetooth® and Bluetooth Low Energy (BLE) Pmod™ Adaptor is a small adaptor card that enables the connection of the ...

Charge your devices with this easy-to-install designer solar panel that hangs in the window.

Allows Multi-Device Control from the Web

It contains a relay, a recorder, a strip of LEDs, a buzzer and a servo motor which will perform basic actions required in daily life.

It contains sensors(mainly), switching-function modules, servo motors, LED strip and a speaker.

This kit is supposed to finish this task perfectly, at least at a primary level. In this kit, you can find common functional modules to coll

The Wio Lite W600 is a cost-effective Arduino compatible board with W600 WiFi module.

The USB Wireless Bridge products are designed to connect to USB host and act as a data collector for other wireless bridge products.

Designed to work together when powered up using wireless communications

The RAK2011 WisLink Cellular Arduino Shield is a compact cellular module, powered by the Quectel BG96 modem chipset.

Industrial-grade gateway for LoRaWAN® connectivity, designed to easily bring secure and reliable connectivity to your outdoor projects.

The RAK2013 Pi HAT is a Raspberry Pi 3B+ compatible cellular communication module.

LoRA Button is a remote wireless trigger based on the LoRaWAN protocol.

Document and create a modern replica of the Harwell Dekatron computer known as the WITCH

WolkSensor is complete and reliable environmental monitoring solution created by WolkAbout team.