Hardware and Software products

This is a bundle of 5.8dBi gain LoRa® antenna specially packaged for Helium Hotspot.

Support virtually any Layer 2 or Layer 3 protocol

Support virtually any Layer 2 or Layer 3 protocol

FACE-FINGER is another FACES kit compatible panel, with the fingerprinter recognition module on it.

This 24×8 LED Matrix display is special designed for FireBeetle series. It supports low-power consumption mode and scrolling display.

The Firefly is a breakout board designed to inspire, build and develop from scratch any Internet of Things application.

Raspberry Pi LED Buzzer Board.

The flanged lip on this Bearing will catch on the outside of a 16mm hole on any plate. Eliminates the need for recessed holes.

These are the clamps we use to firmly hold the Flexible Corrugated Tubing for short wire runs on our builds. The rubber lining holds the tub

Swipe, tap or flick your wrist to control your Raspberry Pi with the Flick HAT.

Spice up your Flick Zero and Raspberry Pi Zero with a stylish white and orange Flick Zero case!

Easily connects flow meter to Atlas EZO™ Flowmeter Circuit.

FlowPaw is a new coding kit that makes it easy for anyone to learn programming by making their own gadgets and gizmos.

Open hardware for sound-based projects using your own custom sound content. Perfect for toys, games, cosplay, art projects, and robots.

A low cost development platform for Kinetis K66, K65, and K26 MCUs

The FSUSB242 is a switch that provides high voltage and surge protection for the HSD+/HSD- lines.

Makes it easy to automate relays unlike any other controller in the world

Add more relays to your Fusion series dual interface relay controller

Fusion for ARM development board integrates first-ever embedded debugger/programmer over WiFi. Enjoy cable-free world!

World's first debugger over wifi for development boards for KINETIS microcontrollers.

World's first debugger over wifi for development boards for STM32 microcontrollers.

World's first debugger over wifi for development boards for TIVA microcontrollers.

The Galaxia® Space Development board is intended to support development of demanding space applications, which require low power, high perfo

Integrated with GigaDevice's MCU, Flash, PMU and Sensor products, this EVAL board delivers tailored solutions to a foray of applications.

2.4", 240x320 pixels, Internet of Displays (IoD) Display Module

2.4", 240x320 pixels, Internet of Displays (IoD) Display Module

2.8", 240x320 pixels, Internet of Displays (IoD) Display Module

3.2", 240x320 pixels, Internet of Displays (IoD) Display Module

gen4 2.8" Diablo16 Intelligent Display Module, non Touch, without Cover Lens Bezel

gen4 2.4" Diablo16 Intelligent Display Module,non Touch, without Cover Lens Bezel

gen4 2.4" Diablo16 Intelligent Display Module, non Touch, Cover Lens Bezel

gen4 2.4" Picaso Intelligent Display Module

gen4 2.8" Diablo16 Intelligent Display Module, (non Touch, Cover Lens Bezel)

gen4 2.8" Picaso Intelligent Display Module

gen4 3.2" Diablo16 Intelligent Display Module non Touch, without Cover Lens Bezel

gen4 3.2" Diablo16 Intelligent Display Module non Touch, Cover Lens Bezel

gen4 3.2" Diablo16 Intelligent Display Module, Capacitive Touch, with Cover Lens Bezel

gen4 3.5" Diablo16 Intelligent Display Module non Touch, without Cover Lens Bezel

gen4 3.5" Diablo16 Intelligent Display Module non Touch, Cover Lens Bezel

gen4 3.5" Diablo16 Intelligent Display Module Capacitive Touch, with Cover Lens Bezel

gen4 4.3" Diablo16 Intelligent Display Module non Touch, without Cover Lens Bezel

gen4 4.3" Diablo16 Intelligent Display Module non Touch, Cover Lens Bezel

gen4 5.0" Diablo16 Intelligent Display Module non Touch, without Cover Lens Bezel

gen4 5.0" Diablo16 Intelligent Display Module non Touch, Cover Lens Bezel

gen4 7.0" Diablo16 Intelligent Display Module non Touch, without Cover Lens Bezel

The Gert VGA 666 (6 bits per colour channel, hence 666) is a breakout/add on board for the Raspberry Pi Model B+, 2B and 3B.

GoPlus is a enhanced M5 module. It features an all-in-one motor driver module, provides a combination of several M5 Modules and Units(SERVO,

The Grand Central is the first SAMD board that has enough pins to make it in the form of the Arduino Mega.

The Hall Angle Sensor is a miniature 360 degree sensor which works based on the principle of the Hall effect.

This is a 6 Dof IMU shield for Arduino, using the ADXL345 accelerometer and the ITG-3200 gyro.

This is an Arduino compatible alcohol sensor module from DFRobot with a 0-5ppm measuring range, supporting I2C and UART outputs.

This keyboard uses an analog input to read the five key state which saves IO resource for the Arduino.

evaluate the water quality, which is often used in water culture, aquaculture, environmental water detection and other fields.

This gray scale sensor is able to measure the intensity of light from black to white.

Most people will think of a DS18B20 temperature sensor first, but this sensor is only capable of measuring temperatures up to 125C.

Light sensors are probably one of the most common sensors in life, they can be found in your laptop, phone or home lighting system.

A rotary switch is a switch operated by rotation. It is often used when more than 2 positions are needed, such as multi-speed control.

The Gravity Conductivity Sensor Switch module can be used to detect if an object has electrical conductivity.

The H3LIS200DL is a high-performance triple-axis linear accelerometer with an ultra-low power consumption of 10uA.

The LIS331HH is a high-performance 3-axis linear accelerometer with an ultra-low power consumption of 10uA.