Hardware and Software products

SensorsThink Smart IoT board

SODAQ SARA Arduino Form Factor (AFF) with NB IoT and LTE-M Modules, GPS, as well as a digital magnetometer and accelerometer

The module employs constant voltage ratio MPPT (Maximum Power Point Tracking) algorithm to maximize output power of the solar panel under

Capable of switching 4 on-board SPST relays

4 gang WiFi switches. Supports switching among 3 modes: interlock/self-locking/inching mode, and both supports to set 1-16s delay in inching

Sonoff Dual WiFi Wireless Smart Switch

Room-filling sound. Wireless music. Easy.

The SparkFun 9DoF Razor IMU M0 combines a SAMD21 microprocessor with an MPU-9250 9DoF (9 Degrees of Freedom) sensor to create a tiny, rep...

The world's first module to bridge the market between hobbyists and consumer products.

The SparkFun Beginner Parts Kit is a small container of parts frequently used by beginning (or even experienced) hobbyists that gives you...

The Intel® Edison is an ultra small computing platform that will change the way you look at embedded electronics. Each Edison is packed w...

The EL Sequencer is a board that contains an Arduino-compatible microcontroller, and circuitry for controlling up to eight strands of ele...

This SIK includes everything you need to complete 12 circuits, which will teach you how to control various electronics using JavaScript.

The SparkFun 5V/1A LiPo Charger/Booster is a no-nonsense circuit for generating one amp from a Lithium Polymer battery at 5V

The SparkFun LiPo Fuel Gauge connects your battery to your project and uses a sophisticated algorithm to detect relative state of charge

Breakout board for the microSD socket

This is the SparkFun MOSFET Power Control Kit, a breakout PTH soldering kit for for the RFP30N06LE N-Channel MOSFET

The SparkFun OpenLog is an open source data logger. Simple to use, simple to change. We wanted to create a serial logger that just worked...

The RedBoard Artemis Nano is a minimal but extremely handy implementation of the Artemis module.

A programmable board that allows you to add mobile app functionality to your embedded projects, via Bluetooth Low Energy (BLE).

This shield enables your Arduino to split a stereo audio input into 7 bands per channel. Read the amplitude of each using the Arduino's ADC.

A breakout board for the ultra low-power LIS331HH three-axis linear accelerometer, which has a digital I2C/SPI serial interface.

The SparkFun USB LiPo Charger is a basic charging circuit that allows you to charge 3.7V LiPo cells at a rate of 500mA or 100mA

This breakout board pairs an SP3485 RS-485 transceiver with an FT232RL USB UART IC to convert a USB stream to RS-485.

This is a breakout board for the Texas Instruments TXB0104 module. The TXB0104 is a 4-bit bidirectional voltage-level translator with automa

A multispectral sensing device, which uses the state-of-the-art sensor IC for a very accurate near-IR (NIR) sensing

The Split Module makes it possible to use two top modules or create more compact designs.

Raspberry Pi RP2040 Based Hardware for Connecting Rapsberry Pi HATs

Deliver the maximum theoretical performance of the Cortex-M7 core

STLINK-V3 compact in-circuit debugger and programmer for STM32

The TAZ 6 features innovative self-leveling and self-cleaning, and a modular tool head design for flexible and multi-material upgrades.

This camera kit allows the low cost production ready TDM114 camera module to be populated on Avnet’s PMOD enabled Xilinx development kits.

ADC to 24 bits and 16 channels, easy to connenct to the Theremino Master and easy to read the analog value.

The world´s first smart developer device for Internet of Things developers.

A universal mounting plate for your projects that require a threaded rod. It can be used with both V-Slot and OpenRail.

An ultra-compact, Arduino-compatible board. Roughly equivalent to the Uno – same processor, same signals brought out to a shield connector.

A great way to start with your TinyDuino and begin creating some cool projects! This kit comes with lithium battery support.

Measure 9 Degrees of Freedom, 3-axis accelerometer, 3-axis gyro and 3-axis compass on one board.

This TinyShield features the high performance and lower power ST L3G4200D 3-axis gyroscope.

This TinyShield microSD Adapter lets you add a huge amount of storage by connecting a microSD card to your TinyDuino.

This kit allows TinyShields to be spaced out apart from one another.

The touch switch shield evaluation board demonstrates the LC717A00AR

Versatile devices are useful for driving a wide range of loads including solenoids, relay DC motors, LED display filament lamps and more.

The UltraZed-EG™ Starter Kit consists of the UltraZed-EG System-on-Module (SOM) and IO Carrier Card bundled to provide a complete system ...

The UltraZed™ PCIe Carrier Card supports the UltraZed-EG™ System-on-Module (SOM), providing easy access to the full 180 user I/O, 26 PS M...

UP board is a credit card size board with the benefits of Raspberry Pi2.

Ultra-compact ARM board

2 SIZES! V-Slot gantry plates.

This IoT weather station kit includes an anemometer, wind vane, and rain bucket.

Industrial & Commercial microSD Cards

The developer board with Wi-Fi connectivity made specially for Flipper Zero.

The functional modules included in this kit are selected especially for a beginner which are frequently required modules, and very cost-effe

The X9C102, X9C103, X9C104, X9C503 are Intersil's digitally controlled (XDCP) potentiometers.

Designed to interface with the 96 Boards

Adds the possibility to fly with precise height control

Obsolete

A crisp, bright 1.12" OLED that's ideal for adding a small display to your project.

Capable of hosting many types of IoT communication modules

The 24V Protected Switch Shield is compatible with Arduino and able to drive resistive, capacitive as well as inductive loads

The M5Stack proto unit is a flexible blank circle with 100mil pitch of holes.