Hardware and Software products

The world’s first bionic robot pet cat

60V Synchronous Buck Converter with Internal FETs Enables High Efficiency

A rapid development platform designed to accelerate the implementation of nexpaq modules with the MAX32625 ARM® Cortex®-M4F microcontroller.

This kit demonstrates a complete embedded display system, allowing for video output to an integrated 10-inch LVDS display.

SPDT Mini Relay 6VDC / 60mA / 100 OHM Coil 10A / 120V Contact Rating

The Blank Slate is a Modulo with a perf board area where you can solder up your own circuit.

The Motion Detector Kit makes it possible to detect human presence. It communicates wirelessly and operates up to 2 years on batteries.

A mounting plate designed to easily allow modular connection of a NEMA 23 stepper motor.

The next generation of smart glasses.

Make some noise with your next project! The MP3 Trigger board is built to make it MP3 sound integration easier than ever. The board has 1...

Stack the AnyBeam HAT onto the Raspberry Pi, switch it on, and start streaming your favorite movies.

Streaming entertainment for every mood – binge or chill.

The Nexys 3 digital system development platform features the Spartan-6 FPGA from Xilinx.

Extend learning beyond the lab with an affordable, student-ready measurement and instrumentation device.

Performance optimized evaluation kit for the nPM1100 Power Management IC (PMIC)

The nRF51822 is a general purpose, ultra-low power SoC ideally suited for Bluetooth Low Energy and 2.4 GHz proprietary wireless applications

Provide an affordable and flexible way for users to try out new concepts and build prototypes

Designed for asynchronous two-way communication between data buses

Extended temperature DM3730-based Gumstix COM w/ OpenGL & DSP w/ TI's WiLink 8 Bluetooth 4.1 + BLE & 802.11b/g/n wireless comms w/ AP mode.

Credit card sized hacker board with 18 RISC cores, FPGA, and GigE, 24x 1Gbps IO, USB, HDMI.

A watch with an always-on B&W E-Paper display, up to 7 day battery life, 50 meter water resistant, metal body, and a durable glass screen.

A watch with an always-on color E-Paper display, up to 10 day battery life, durable glass lens and stainless steel curved ergonomic design.

If music be the food of love, play on. But make sure you use this super little DAC to get the best out of your Raspberry Pi audio!

Stepper motor controller is a PHPoC smart expansion board for stepper motor. You can easily control stepper motor by using this

Microchip's 32-bit portfolio with the MIPS (microAptiv™, M4K®, and M-class) and ARM®(Cortex® M0+, M4, M7) cores offer high performance mi...

Basic component of Pi-Cubes system is the Pi-Cubes Main Board, that board is motherboard of the system.

The Pmod AD1 is a two channel, 12-bit analog-to-digital converter that features Analog Devices AD7476A.

The Pmod DA1 is an 8-bit digital-to-analog converter powered by two Analog Devices AD7303.

The Pmod DPOT is a digital potentiometer powered by the Analog Devices AD5160.

The Pmod LVLSHFT is a digital logic level shifter.

The Pmod USBUART provides a USB to UART cross-conversion through the FTDI FT232RQ.

With the Pmod WiFi, users can communicate with the IEEE 802.11g compliant chip through SPI and achieve data rates up to 54 Mbps.

Power Supply for general project use.

Pre-GO (Precision Geolocation) with Precise Point Positioning powered by the u-blox NEO 7P GPS/GLONASS receiver with patch antenna w/ UART.

Save time with ready-to-use touch and distance sensors, printed with our unique pattern.

The M5Stack PROTO Module is a flexible blank circle with 30 pins which could connect with all series of M5Stack Core

ProtoPi T allows you to play around with GPIO pins on the Raspberry Pi 3 or 2, all 40 them !

ProtoPi T with USB Serial Access not only allows you to play around with the GPIO pins on the Raspberry Pi 3 or 2, but also provides access

ProtoStax for Breadboard gives you a modular prototyping enclosure that can fit any breadboard friendly MCU or SBC on a half-sized BB.

Build your own expansion deck and add to your Crazyflie 2.0

PSoC 4 evaluation shield for motor control applications. Use with any PSoC 4 Pioneer Kit.

The Presence API allows you to persistently track and monitor device metadata including device online/offline, health, and location.

Base on SX1301 LoRaWan Gateway Module

Here comes the 4th generation Raspberry Pi model B of popular Raspberry Pi family!

8 on-board relays, 8 12-bit ADC channels, 12-bit DAC output, 8 opto-isolated inputs, 4 open collector outputs, 6 GPIO's, 4 layer stackable

Power your Raspberry Pi using Power over Ethernet–enabled networks

Designed to fit both the Pi Zero and the Pi Zero W

J1010 is a hand-size edge AI box built with Jetson Nano production module, rich set of IOs, aluminum case, passive heatsink, pre-installed J

Suitable for switching small power appliances

The ReSpeaker Core v2.0 allows developers create powerful and impactful voice and sound interfaces.

A great duo of products in one box to help you get you started with and teach you the basics of RFduino.

A finger-tip sized, Arduino compatible, wireless enabled microcontroller.

The Desktop RoboTurret is an Arduino based robotic platform that makes it easy to get started in the world of robotics!

The definitive break-out board for the BeagleBone Black and Black Wireless, designed to facilitate a host of small robotic systems

RoMeo V2 [R3] is an All-in-One Arduino based robot board, it is especially designed for robotics applications, and extended devices.

The RSL10 SIP offers the easiest way to bring the industry's lowest power Bluetooth(R) low energy technology to wireless applications.

RSL10 is a Bluetooth 5 certified, multi-protocol radio System on Chip (SoC) which brings ultra-low-power wireless technology to wireless app

Use this Hall effect switch shield in Infineons 2Go from factor to detect the postition and speed of a magnet.

Learn how to build, automate, and scale on the #1 platform for no-code && code.

Providing security, convenience, and energy savings, this ZigBee device is a triple-threat and a key part of any smart home.