Hardware and Software products

FAN65004B is a wide VIN highly efficient synchronous buck regulator, with integrated high side and low side power MOSFETs.

FAN65005A is a wide VIN, highly efficient synchronous buck regulator, with integrated high side and low side power MOSFETs.

FAN65008B is a wide VIN highly efficient synchronous buckregulator, with integrated high side and low side power MOSFETs.

Fully automated, hyper-local food production has never been so attainable.

This 8-bit non-inverting translator uses two separate configurable power-supply rails.

This ADKey board with 10 keys can be used to drive your DFPlayer Pro, DFPlayer Mini, or Voice Recorder Module...

The LIS2DW12 is a low-power high-performance three-axis linear accelerometer, featuring low power(50nA), low noise(1.3mgRMS), 32 FIFO...

DFRobot TCS3430 XYZ Tristimulus Color Sensor employs the new generation of TCS3430 spectral sensor IC launched by the well-known AMS company

A .NET Gadgeteer mainboard running .net Micro Framework

This is a bundle of 5.8dBi gain LoRa® antenna specially packaged for Helium Hotspot.

Support virtually any Layer 2 or Layer 3 protocol

Support virtually any Layer 2 or Layer 3 protocol

FACE-FINGER is another FACES kit compatible panel, with the fingerprinter recognition module on it.

This 24×8 LED Matrix display is special designed for FireBeetle series. It supports low-power consumption mode and scrolling display.

The Firefly is a breakout board designed to inspire, build and develop from scratch any Internet of Things application.

Raspberry Pi LED Buzzer Board.

These are the clamps we use to firmly hold the Flexible Corrugated Tubing for short wire runs on our builds. The rubber lining holds the tub

Swipe, tap or flick your wrist to control your Raspberry Pi with the Flick HAT.

Spice up your Flick Zero and Raspberry Pi Zero with a stylish white and orange Flick Zero case!

Easily connects flow meter to Atlas EZO™ Flowmeter Circuit.

FlowPaw is a new coding kit that makes it easy for anyone to learn programming by making their own gadgets and gizmos.

Open hardware for sound-based projects using your own custom sound content. Perfect for toys, games, cosplay, art projects, and robots.

A low cost development platform for Kinetis K66, K65, and K26 MCUs

The FSUSB242 is a switch that provides high voltage and surge protection for the HSD+/HSD- lines.

Makes it easy to automate relays unlike any other controller in the world

Add more relays to your Fusion series dual interface relay controller

Fusion for ARM development board integrates first-ever embedded debugger/programmer over WiFi. Enjoy cable-free world!

World's first debugger over wifi for development boards for KINETIS microcontrollers.

World's first debugger over wifi for development boards for STM32 microcontrollers.

World's first debugger over wifi for development boards for TIVA microcontrollers.

The Galaxia® Space Development board is intended to support development of demanding space applications, which require low power, high perfo

Integrated with GigaDevice's MCU, Flash, PMU and Sensor products, this EVAL board delivers tailored solutions to a foray of applications.

2.4", 240x320 pixels, Internet of Displays (IoD) Display Module

2.4", 240x320 pixels, Internet of Displays (IoD) Display Module

2.8", 240x320 pixels, Internet of Displays (IoD) Display Module

3.2", 240x320 pixels, Internet of Displays (IoD) Display Module

gen4 2.8" Diablo16 Intelligent Display Module, non Touch, without Cover Lens Bezel

gen4 2.4" Diablo16 Intelligent Display Module,non Touch, without Cover Lens Bezel

gen4 2.4" Diablo16 Intelligent Display Module, non Touch, Cover Lens Bezel

gen4 2.4" Picaso Intelligent Display Module

gen4 2.8" Diablo16 Intelligent Display Module, (non Touch, Cover Lens Bezel)

gen4 2.8" Picaso Intelligent Display Module

gen4 3.2" Diablo16 Intelligent Display Module non Touch, without Cover Lens Bezel

gen4 3.2" Diablo16 Intelligent Display Module non Touch, Cover Lens Bezel

gen4 3.2" Diablo16 Intelligent Display Module, Capacitive Touch, with Cover Lens Bezel

gen4 3.5" Diablo16 Intelligent Display Module non Touch, without Cover Lens Bezel

gen4 3.5" Diablo16 Intelligent Display Module non Touch, Cover Lens Bezel

gen4 3.5" Diablo16 Intelligent Display Module Capacitive Touch, with Cover Lens Bezel

gen4 4.3" Diablo16 Intelligent Display Module non Touch, without Cover Lens Bezel

gen4 4.3" Diablo16 Intelligent Display Module non Touch, Cover Lens Bezel

gen4 5.0" Diablo16 Intelligent Display Module non Touch, without Cover Lens Bezel

gen4 5.0" Diablo16 Intelligent Display Module non Touch, Cover Lens Bezel

gen4 7.0" Diablo16 Intelligent Display Module non Touch, without Cover Lens Bezel

The Gert VGA 666 (6 bits per colour channel, hence 666) is a breakout/add on board for the Raspberry Pi Model B+, 2B and 3B.

GoPlus is a enhanced M5 module. It features an all-in-one motor driver module, provides a combination of several M5 Modules and Units(SERVO,

The Grand Central is the first SAMD board that has enough pins to make it in the form of the Arduino Mega.

The Hall Angle Sensor is a miniature 360 degree sensor which works based on the principle of the Hall effect.

This is a 6 Dof IMU shield for Arduino, using the ADXL345 accelerometer and the ITG-3200 gyro.

This is an Arduino compatible alcohol sensor module from DFRobot with a 0-5ppm measuring range, supporting I2C and UART outputs.

This keyboard uses an analog input to read the five key state which saves IO resource for the Arduino.