Hardware and Software products

More cost-effective monochrome backlight derivative for you, i.e.,

The Grove - 1-Wire Thermocouple Amplifier is a thermocouple-to-digital converters with 14-bit resolution and cold-junction compensation.

This module is based on a 2-Coil Latching Relay

12 bit, digital, triaxial acceleration sensor with smart on-chip motion and position-triggered interrupt features.

The Grove - 6-Axis Accelerometer&Gyroscope(BMI088) is a 6 DoF(degrees of freedom) High-performance Inertial Measurement Unit(IMU) .

Instead of using coil, packaged solid-state relays(SSR) use power semiconductor devices such as thyristors and transistors

The Grove ecosystem has been evolving since the introduction of it and now we are proud to bring you the Grove – Breadboard!

The Electricity sensor module is based on the TA12-200 current transformer which can change large alternating current into a small amplitude

The sensor on Grove - Gesture is PAJ7620U2 that integrates gesture recognition function with general I2C interface into a single chip

Grove - Haptic motor is a Grove module integrated with DRV2605L which will give your project more feelings.

I2C Hub Grove is an extension Grove module for connecting multiply I2C devices to Grove Base Shield

The Grove - I2C Motor Driver (TB6612FNG) can drive two DC motors up to 12V/1.2A or drive one stepper motor up to 12V/1.2A

I2C Thermocouple Amplifier (MCP9600) is a thermocouple-to-digital converter with integrated cold-junction and I2C communication protocol.

A 9 Degrees of Freedom IMU (Inertial measurement unit) which combines gyroscope, accelerometer and electronic compass.

This four-in-one sensor allows you to collect the data from the ambient environment and transfers over the I2C bus.

Grove - Luminance Sensor using APDS-9002 as lumens Sensor, provide the linear transform lumen intensity for the output voltage levels.

The Grove - Optical Rotary Encoder(TCUT1600X01) is a transmissive sensor that includes an infrared emitter and two phototransistor detectors

Carrying a GrovePi+ board together with 12 carefully selective Grove sensors with 10 pieces cables , this starter kit gets you up and runnin

We integrated 10 full-color RGB LEDs on this stick, with only one signal pin you can control all 10 LEDs easily.

Makes it simple and easy to connect sensors and devices to any 96Boards-compatible base board

The camera can present dynamic thermal images and detect the surrounding temperature from -40℃~300℃.

Grove - Water Atomization is a perfect module for you to quickly DIY a humidifier with Arduino. You can also develop more advanced and inter

This GT2 (2mm) Timing belt is made of Neoprene and has Fiberglass Cords for strength. It's great for your automation projects.

ShieldBuddyTC275 is fitted with the Infineon TC275 32-bit multicore processor on a board following the Arduino standard.

The i.MX 6 series unleashes the industry's first truly scalable multicore platform that includes single-, dual- and quad-core families ba...

Kit that includes the i.MX8M+ SoM and a dual-camera adapter.

Have an amazing IoT device, PCB, protoboard without an enclosure? Get a 3D design and prototype now!

Works like a Wireless push notification transmitters

A very flexible form factor, with a variety of physical sizes

Long Range IoT Industrial wireless vibration and temperature sensor

Perfect for anyone who loves tech, wants a new geeky challenge or build their own personal Internet of Things.

Sleek, compact, versatile, powerful. Immerse yourself in the power of the Intel® NUC.

This microcontroller board is perfect when you want something very compact, but still with a bunch of pins.

IWR1443 BoosterPack

JustBoom Player is a beautiful and highly-intuitive interface for playing your music from any source.

Ever built your own computer? With our kit and simple story book you’ll not only build your own powerful computer, you’ll bring it to life!

The Kinetis K2x MCU family is pin-peripheral and software-compatible with many of the Kinetis K series MCU families, offering full and hi...

Add smart light and audio to the SensorTag

A wearable dev board that adds mobile application functionality to your e-textile projects via Bluetooth LE.

The MCP9700 is a small thermistor type temperature sensor

The LilyTiny is a tiny little LilyPad board designed to add flashy functionality to your project without taking up a lot of room. Even th...

Seeed’s LTE CAT.1 Pi HAT is an open source cellular extension modem for Raspberry Pi, based on u-blox LARA-R2xx series.

Battery Bottom

STAMP IO is an IO expansion board based on the STM32F030 main controller.

Hat SPK is an M5StickC compatible speaker

ToF HAT is a high precision laser-ranging sensor specifically designed for M5StickC.

Custom made OpenBuilds Tee Nuts. They were designed to slide into slots with less hassle than the standard rectangular tee nuts.

It's a HAT for Raspberry Pi Zero Series with LED indicators for GPIO, Programmable Push buttons, active buzzer and USB to Serial interface.

Maker Tape's nylon fibers combined with conductive materials result in an amazingly strong and highly conductive tape that won't leave a mes

An Arduino UNO compatible board with built-in buzzer & 12x LEDs for students to learn coding and microcontroller. (Using CH340 USB-Serial)

Introducing the first MODULAR COBOT

Digital Temperature Sensor in TO-92 Package Ideal for Measuring Ambient Temperature

The mcDemo205 is the world’s most powerful IoT module. It combines SIGFOX™, GNSS, and the new mc-Air™ Low Power LAN protocol into one device

Converts DTMF (Touch Tone) signals into digital.

Everything you need in one convenient kit!

I/O Carrier Card speeds prototype and evaluation of MicroZed and provides an excellent starting point to create your own MicroZed carrier.

M5Stick is a mini esp32 development board including 1.3’ OLED Screen(64x128), led, button, buzzer, IR Transmitter, 80mAh-Battery and MPU9250

Really cool mini heated build plate for your mini 3D printer builds – and so much more...