Hardware and Software products

The Power Module allows you to connect a 5 V DC power adapter via a standard 2.1 mm power jack socket.

With Raspberry Pi computers now equipped with WiFi and Bluetooth, you can add even more radio options with Adafruit Radio Bonnets!

A thumb-size development board with WiFi and BLE, made to simplify the process of building IoT products.

The RFID Module can read and write to 13.56MHz RFID cards an NFC devices. It's like OAuth for real life. This module supports CharlieCard...

This infrared receiver will pick up signal from any remote that sends an infrared signal

The RobotGeek LED Driver is a fast and flexible way to add LEDs to your Arduino Project.

A compact board similar to the Seeeduino V4.2/Arduino UNO, and it is fully compatible with Arduino Nano on pinout and sizes.

Standard LoRaWAN® gateway that supports connecting to different network servers and global frequency plans from 865 MHz to 923 MHz

Humidity and Temperature sensor with

SIMCom LTE Cat-4 Module + GNSS

A conveniently sized breaboard with 1x630 tie point terminal strip and a 1x100 tie point distribution strip.

Create something different. Palm-sized, reconfigurable computers for building intelligent things.

open source robot arm

The Intel® Edison is an ultra small computing platform that will change the way you look at embedded electronics. Each Edison is packed w...

This tiny audio amplifier is based on the Texas Instruments TPA2005D1. Its efficient class-D operation means low heat and long battery li...

This buzzer is an add-on for your RedBot that gives your robot the ability to make awesome beep-boop noises or alerts when something inte...

Welcome the SparkFun RedBot Kit, a robotic development platform capable of teaching two motor robotics and sensor integration! This kit c...

World smallest Time-of-Flight (ToF) ranging sensor

The Trenz Electronic TE0802 is a development board integrating a Xilinx Zynq UltraScale+

Audio Adaptor Boards for Teensy 3.x and Teensy 4.x

TinyUSB makes it easy to copy images, audio files, or whatever else you want to an Arduino just like it was a thumb drive.

MIPI 5MP AF Camera for QUAD/DUAL

DFRobot provides you with a compact and efficient 7.4V lithium battery USB charger, only the size and weight of an ordinary Gravity sensor.

Get the headset, two wireless controllers and two base stations enabling 360° room-scale motion-tracking when you order Vive. Be among th...

Several kinds of LED Strips have already been available in our bazaar for a long time, however, there were no Grove compatible LED strips.

Webduino Blockly is a visual programming editor

WebUSB programmable FPGA development boards. Cloud-based synthesis.

FCC/CE Certificated ESP8266 Wifi Module

Need power? This ultra low profile power supply delivers at a whopping 24 volts with 14.6 Amps!

This breadboard has two power buses, 10 columns, and 30 rows - a total of 400 ties in points for Arduino and Raspberry Pi project.

The CC110L RF BoosterPack is a low-power wireless transceiver extension kit for use with the TI MSP-EXP430G2 LaunchPad development kit.

The 4D Programming Cable is a USB to Serial-TTL UART converter cable. It incorporates the Silabs CP2102 USB to Serial UART bridge IC.

4-port Relay Board is a Smart Expansion board for PHPoC Shield and Arduino. It carries 4 relays.

The MR60BHA1 60GHz radar module applies FMCW detected theory to implement simultaneous personal breathing rate and heart rate detention in h

7inch HDMI/USB Display/Touch for UDOO X86

Feather is the new development board from Adafruit, and like its namesake it is thin, light, and lets you fly!

Provides capability interfaces that enable you to describe your devices and the properties, events, and directives that they support.

This sensor help you to detect the light density and reflect the analog voltage signal back to Arduino controller.

The Arduino Funnel I/O (Fio) is a board designed by Shigeru Kobayashi, based on the original design from LilyPad. Funnel is a toolkit to ...

Build your first Internet of Things project or simply make an existing device smarter.

Save data from your MKR board

This shield really helps you prototype wireless applications.

Device achieves throughputs approaching 1 MIPS per MHz, balancing power consumption and processing speed.

Designed as a power supply source for the battery-operated units

If you are gonna build a robotics project, then you need to check out this guy, Black Gladiator.

Eight super-bright RGB LED indicators that are ideal for adding visual notifications to your Raspberry Pi without breaking the bank!

Fuel Tank BoosterPack

CardKB is a unit can achieve QWERTY full keyboard.

A creative and fun way to learn electronics with peel-and-stick stickers.

The Digilent Cora Z7 is a ready-to-use, low-cost, and easily embeddable development platform designed around the powerful Zynq-7000 APSoC.

A lite version of the Core Module without the radio module assembled

Creator Ci40 is an IoT-optimized dev board that features 802.11ac 2x2, Bluetooth and 6LoWPAN wireless connectivity.

The Curiosity Nano Base for Click boards is more than just a base board - it’s the ultimate rapid prototyping base.

The DC motor shield is a small evaluation board equipped with TLE94112ES for use with Arduino.

Our newest track mobile robot platform. It is fully compatible with most popular controllers in the market such as Arduino, Raspberry Pi...

Easily integrate image sensors into your camera projects

ARM Cortex-M4F based MCU TM4C1294 Connected LaunchPad

Well suited for any space-limited or battery-operated applications with its ultra-small size, robust performance and low-energy consumption.