Hardware and Software products

A cloudless Speech Recognizer / Voice Synthesizer for the Arduino platform

The original MPLAB Xpress Evaluation Board (p/n DM164140) features the versatile PIC16F18855 MCU, which supports a wide range of embedded...

The Pixhawk XRacer board family is optimized for small racing quads and planes with built-in wifi.

The MSP-EXP430FR4133 LaunchPad development kit is an easy-to-use evaluation module for the MSP430FR4133 microcontroller.

256kB of FRAM memory!

The Multi-Sensor Board enables prototyping of devices for asset tracking, wearables, smart home and other smart sensing devices. NOA1306

MyOctopus OPT 3001 Ambient Light Sensor (ALS) - Human Eye Precision : 0.01 lux to 83k lux - 12c: 0x44 0x45 0x46 0x47 -1.6 V to 3.6 V

NuGet with nanoFramework System.Net Class Library.

The NanoTracker is a portable personal tracking device powered by a rechargeable battery. NanoTracker is freely configurable.

Linux autopilot on Raspberry Pi

The NCP110 offers a unique combination of very low voltage, low noise, high PSRR and low quiescent current.

Take your projects to the next level with more power and strength with this new high torque 345oz/inch NEMA23 stepper motor.

NeoDigito are the alternative for conventional seven-segment displays and LED matrix, mainly for big size displays.

MINI_PROTO is an M5Unit size of universal prototyping board. Smaller than the PROTO unit.

This product was replaced by a updated version NFC Shield V2

Node is a base as a intelligent node in the IOT.

Carrier board for Atlas Scientific EZO line of sensors.

The nRF9160 Feather is a true Feather, and then some, board.

This 8mm Acme Nut Block is a great choice for many projects requiring lead screw linear motion.

These microcontrollers simplify evaluation and development of motor control applications, without requiring deep motor control experience.

A laser-cut robot kitten that runs and learns from you.

This handy little locknut is included with each of our Wheel Kits. They are super affordable and will work with M5 screws.

SERVO DRIVER

A cute, connected, cephalopod camera to stick on your window or sit on your shelf!

The best IoT software platform that meets today's and tomorrow's clients requests for an end-to-end solution

Supports 3 major platforms. Can easily evaluate various sensing functions.

OpenEdge is an open edge computing framework that extends cloud computing, data and service seamlessly to edge devices.

Kick start your IoT ideas with the Orange Maker IoT platform.

the perfect opportunity to build and have your very first walking Bluetooth control robot NO SOLDERING REQUIRED!

Otto DIY Humanoid is a step forward into the robot revolution, it can do all the same features his predecessors do but now includes arms.

Credit card sized hacker board with 18 RISC cores, FPGA, and GigE, 24x 1Gbps IO, USB, HDMI.

Pepper 43R is based on a TI Cortex-A8 processor (AM3354) w/ WiFi and LCD header. Supports Yocto Project build system and Android.

The P4M-400 is a module type of PHPoC IoT Board. It is designed to be integrated into other products

Stepper motor controller is a PHPoC smart expansion board for stepper motor. You can easily control stepper motor by using this board.

With Stepper Motor Controller Ⅱ, you can control a stepper motor more precisely. It supports microstepping up to 1/32.

The phyCORE-iMX 8M Mini System on Module combines best-in-class performance and low power consumption with minimal size and affordability.

The ultimate desktop retro arcade machine! Picade is a Raspberry Pi-powered mini arcade that you build yourself.

For connecting a chipKIT board to the Microchip PICkit 3 debugger/programmer.

The Pico SoM is a 36x40mm, high performance platform that is highly optimized for Internet of Things applications. It is pin-compatible w...

The PICO-IMX7 design based on the NXP i.MX7 processor is a purpose-built, small footprint hardware platform compatible with Intel Edison ...

Start your Android Things Project today with the PICO-PI-IMX7 based around the NXP i.MX7.Included in the pack is a USB Type-C cable for p...

PicoZed™ is a highly flexible, rugged, System-On-Module, or SOM that is based on the Xilinx Zynq®-7000 All Programmable (AP) SoC. It offe...

The PicoZed™ FMC Carrier Card V2 is the 2nd generation FMC Carrier supporting the PicoZed System-on-Module. This Carrier supports develop...

Mobile and Internet of Things hardware device for software developers The Round Solutions PingPong is a modular IoT Hardware Platform.

The Pi PoE Switch HAT is an add-on board for the Raspberry Pi that brings the Pi Supply Switch technology together with PoE.

M5Stack NEW Corner Connector for 1515 Aluminum Profile (10pcs a set)

Web-based remote desktop on cloud servers pre-installed with FPGA design software and licenses for research and development needs.

The Pmod ACL2 is a 3-axis MEMS accelerometer powered by the Analog Devices ADXL362.

The Pmod AD5 is an ADC that utilizes a fourth order sigma-delta modulator, a programmable gain array, and on-chip digital filtering.

The Pmod BB provides a ready-made solution for prototyping breadboard circuits.

This kit is a handy accompaniment to your 12-pin Pmod.

The extension cable lets you locate your Pmod away from its host board, and the included male gender changer provides extra connectivity.

The Pmod CDC1 is a capacitative sensor that uses the Analog Devices AD7156.

The Pmod CON1 has two terminals that can be used to provide power from an outside source and the other four can be used for data signals.

The Pmod DA2 is a 12-bit digital-to-analog converter powered by the Texas Instruments DAC121S101.

The Pmod DA3 is a 16-bit digital-to-analog converter powered by the Analog Devices AD5541A.