Hardware and Software products

This is a standard LED Current Meter 10A. It measures 0-9.99A with 2% accuracy.

Designed for e-textiles and wearables projects

We’ve updated the Simple board to create the LilyPad USB by replacing the classic ATMega328 with the new ATMega32U4. No more FTDI Basic!

This is a simple pack of five Green LilyPad LEDs that are still attached to one another

This is a simple pack of five White LilyPad LEDs that are still attached to one another

This is a simple pack of five Yellow LilyPad LEDs that are still attached to one another

The LilyPad Sewable Electronics Kit lets you explore the wonderful world of electronic sewing (e-sewing) and e-textiles through a series ...

The LilyTwinkle is a tiny little LilyPad board designed to add some twinkle to your project.

All the hardware and 3D printed parts to build the arm, then hook up your own microcontroller

Open source, breadboard friendly, and comes with lots of software examples to get you started.

LOFIR Robot EDUBOX is a complete robot construction kit that lets you build six different robots with lasercut blocks and arduino

Logic prop prefabs can be used to create, debug and design simple to complex virtual electronic circuits and or game controls.

The straight Loomia 4-wire Bus has four leads that are each 0.15in wide.

The Loomia 5V - 7.2V Heater is made to work with an off-the-shelf, 5V battery pack or two lipo batteries in series.

The Loomia Double Backlit User Interface is like the Single Backlit Button, but twice the fun!

Like the Mini Pressure Sensor... but bigger!

The Loomia Single Pressure Sensor gives you an analog read that maps to force on the sensor.

LoRa Backpack for ESPectro is an extension for ESPectro that lets you send data over long distances with an extremely low data rate.

I2C interface adapter for CHIP. Now you can plug all of your favorite ControlEverything hardware into CHIP!

An Arduino Uno, XMC1100 Boot Kit, or similar board connected to the shield can control the three Low Side Switches via general IO pins

Seeed’s LTE CAT.1 Pi HAT is an open source cellular extension modem for Raspberry Pi, based on u-blox LARA-R2xx series.

Luci is a PX4 compatible flight controller that brings advanced networking capabilities to drone platforms.

https://docs.m5stack.com/#/en/unit/M5-bit

M5SCALE DIY Kit is a DIY kit of M5 that implements a digital scale, which makes it more of an Application-approach development kit.

This an application-level module, which implements a motion & robotic control and it is totally customizable with different length.

Joystick HAT is one of the HAT module that is specifically designed for M5StickC.

Hat PIR is an M5StickC compatible human body induction sensor, it belongs to “Passive pyroelectric infrared detector”

PROTO_HAT is a HAT size of universal prototyping board.

PROTO PLUS HAT is a universal proto board compatible with M5SticKC.

YUN HAT is a cloud-shaped multi-function environment information measurement base.

M2 is an open source automotive interface that can take your car to the next level.

Starter Kit + Maker Board helps you start coding and making projects with no wires or resistors, and no hassle. Hack our pre-written code!

Essential for control of your project, this range of variable resistors and switches are ideal for taking control.

It is the smallest ESP32 board now. And It uses Espressif Sip ESP32-PICO-D4 chip, which has two cores, up to 240MHz for WiFi and Bluetooth.

It's compatible with Leaf Maple. It's a mini version. It only need 10$. And It supports Arduino IDE. It's cool to program it with Arduino

A Hiwonder AI Vision Robot Arm with Mecanum Wheels Car Powered by Raspberry Pi Open Source Robot Car

Enable engineers to design, simulate, and implement algorithms

Dual-Channel, Bidirectional Logic-Level Translator Designed Specifically for Low-Power Consumption

An Ultra-Low-Power ARM Cortex-M3 with Advanced Analog Front-End in an Arduino Form Factor

Provides a platform for leveraging the capabilities of the MAX78000 to build new generations of artificial intelligence (AI) devices.

Use custom instruments, audio effects, and MIDI effects in Ableton Live.

The MAXREFDES117# reference design is a low power, optical heart-rate module complete with integrated red and IR LEDs, and a power supply. I

The MAXREFDES89# is an mbed®-compatible, Arduino® form factor shield, ideal interface for anyone developing with brushed DC motors.

A little case to hold your mcMod120. Comes with an additional magnet enclosure (magnets included!) so you can use the built-in Reed switch

Designed for IP video surveillance, provides high endurance support for 3 years of high-quality, continuous 24/7 video recording.

Handy accessories to get you started with micro:bit!

An unashamedly old school LED matrix display board using the beautiful little Lite-On LTP-305 matrices.

Gives you multiple ways to mount your switches, adjustable along the length of the linear guide. Mounts to V-Slot or compatible extrusion.

Microsoft and SparkFun have teamed up to bring you some IoT (Internet of Things) fun. The Microsoft Azure IoT Starter Kit for the SparkFu...

This kit demonstrates a complete embedded display system, allowing for video output to an integrated 10-inch LVDS display.

The Breakout Carrier Card is the simplest, least expensive way to enable the PL I/Os on the MicroZed SOM.

The MicroZed Embedded Vision Development Kit builds on the MicroZed SOM by providing a video specific carrier card. The kit includes hard...

Small bearings that can fit a variety of projects, such as filament extruders. Standard 5mm ID bore.

Need to detach or debug your HAT? Then the Mini Black HAT Hack3r is for you!

These micro-hook test clips allow the Analog Discovery signal wires to be connected to component leads, wires, and other circuit components.

Replacement smartphone/tablet holder for the the 3DR Solo controller.

The momote001 is the first of many steps that will be given until it is completely feasible to the Internet reaches in anything.

a virtual assistant for developers to create their own voice enabled applications to interact with consumers in natural language

These mounting hubs are awesome for mounting, to gain a strong connection to a set screw locking shaft hub.