Hardware and Software products

This is an Arduino hydrogen gas sensor. It has high sensitivity to Hydrogen (H2) and less sensitivity to alcohol, LPG,cooking fumes .

Communication with the Analog ORP Meter is done using only simple wiring and programing.

The Gravity Conductivity Sensor Switch module can be used to detect if an object has electrical conductivity.

It is an electric switch that is actuated by very little physical force.

what's the best way to detect the magnet? Use anther magnet. But it's not sensitive enough.

The microwave sensor applies the Doppler effect to detect moving objects using microwaves.

The DFRobot Vibration Sensor buffers a piezoelectric transducer that responds to strain changes by generating a measurable output voltage

This is an Arduino compatible piezo film vibration sensor. It is made up of flexible piezo film and converter board.

This Gravity: I2C HUB module is designed to connect up to 8 I2C devices to the main controller.

This device is based around a MEMS LIS2DH chip solution and has high-performance ultra-low power mode.

If you still don’t know how to play Internet of Things (IoT), the DFRobot OBLOQ module will be ideal for connecting you to the IoT world.

The Grove - 10A DC Current Sensor (ACS725) is a high precision DC current sensor based on ACS725.

Instead of using coil, packaged solid-state relays(SSR) use power semiconductor devices such as thyristors and transistors.

The Grove - 3-Axis Digital Accelerometer ±200g (ADXL372) is an ultra-low-power digital output MEMS Accelerometer.

The Grove - 5-Way Switch can be used to detect the switch position and event like single click/double click/long press, etc

Capacitive Touch Slider Sensor (CY8C4014LQI) is a multifunctional touch sensor. You can touch the two buttons or slide on the 5-segment s...

The Grove - Micro Switch is a simple, low cost micro switch that integrated the plug-and-play Grove connectors

Grove - Recorder is based on ISD1820P, which can record 8~20 sec by set resistor and cycle play.

This is the latest version of Grove-recorder, and also the best version.

8x8 RGB LED Matrix is awesome for simple image display, 64 pixel leds and 255 colors for each pixel means almost infinite possibilities.

The Grove RS-485 allows your Arduino connect with RS-485 device easily, you just need to plug and play.  

The Grove Starter kit for Azure IoT Edge is a joint-effort developed by Microsoft and Seeed Studio.

Grove Starter Kit for Seeed Studio XIAO assembles the Seeed Studio XIAO series compatible Expansion board, various kinds of Grove modules, c

The Grove Starter Kit for Wio LTE is a simple and cost effective choice for you to get a quick start with the Wio LTE board.

The Grove - Step Counter(BMA456) is based on BMA456, which is an exetremely small, triaxial, low-g high performance accelerations module.

This is a high quality aluminum timing pulley that is perfect for your automation projects!

High quality 30 tooth GT2 aluminum timing pulley that is perfect for your V-Slot automation projects!

If your project requires a belt with a strong grip, GT3 is what you are looking for!

Give Your Pi Voice, Eyes and Sensors, and now 5G!

The Helium Element is the wireless bridge between Helium Atoms and any cloud platform.

A graphical utility that can be used to push a firmware update to the Hologram Dash through USB or Wireless OTA (Over the Air)

A super-easy way to attach sensors and actuators without needing a breadboard.

A mountable yet movable plate for your Smooth Idler Pulley. It can be used with both V-Slot and OpenRail.

An easy to use and reliable start to any data aggregation application

Boasting up to a 28 Mile range using a wireless mesh networking architecture

Long range wireless enterprise series sensors

Capacity and form factor options to meet the unique needs of industrial applications

An easy to use and reliable start to any data aggregation application

XENSIV™ - TLE493D-W2B6 A0 3D magnetic Hall sensor with I2C interface and wake-up function

The C027 is a complete starter kit that allows quick prototyping of a variety of applications for the Internet of Things.

InTime optimizes FPGA timing and performance by recommending the right build settings using machine learning techniques.

A general-purpose, professional input/output module based on a standard Arduino Ethernet microcontroller.

A general-purpose, professional input/output module based on a standard Arduino Uno microcontroller.

The easiest and most secure way to move sensor data to the cloud.

IOT Relay allows you to control an AC power outlet from a simple signal wire.

Industrial IoT Platform for Utilities and Smart Cities

xBUS and xPDI breakout

JOYSTICK is a joystick module in the FACES series. it need to stack FACES base and M5Core to use.

JTAG-HS3 is the newest member of our family of affordable high-speed Xilinx FPGA programming solutions.

The JTAG-USB cable allows you to use your PC to connect to a JTAG scan chain or to access an SPI interface.

The Amp Zero Case is a sleek and durable enclosure for the Pi Zero and Amp Zero pHAT.

This device is capable of receiving button presses from a remote control up to 750 feet away!

An Open Source TV Box

When equipped with this expansion board, users can design and develop various wearable devices, and be as creative as they want on IoT.

A high-performance, palm-sized SBC (single board computer). It includes a Windows 10 Pro OEM activation key.

A business card which is a functional FPGA development board

Single, Double or Triple available. Works with V-Slot and Tee Slot extrusions.

A breakout board for FPC cables, up to 60 pin.