AnalogLamb Announces RISC-V Polos Development Boards, Starting at Just $1.99

Low-cost microcontroller boards include a range of features, with a top-end $4.99 version including floating-point unit and a CAN bus.

ghalfacree
9 months ago HW101

Beijing-based embedded hardware specialist AnalogLamb has announced three new low-cost entries in its Polos family of development boards, all powered by RISC-V microcontrollers from WCH Electronics — and with prices starting at $1.99.

"Polos CH32Vxx RISC-V Breakout Boards are interconnectivity MCU [Microcontroller Unit] boards based on 32-bit RISC-V core," AnalogLamb explains in its product announcement, brought to our attention by Linux Gizmos, "with hardware stack area and fast interrupt entry. Compared with standard RISC-V, the interrupt response speed is greatly improved."

AnalogLamb has announced a trio of new RISC-V development boards, all priced under $5. (📷: AnalogLamb)

The lowest-cost model in the family, at just $1.99, is the Polos CH32V003 Breakout Alef, using a 32-bit RISC-V processor core running at up to 48MHz and with 2kB of static RAM (SRAM) and 16kB of flash. It offers a single direct-memory access (DMA) channel, one op-amp, one 10-bit analog to digital converter (ADC), two 16-bit timers, USART, I2C, SPI buses, and 18 general-purpose input/output (GPIO) pins.

The Polos CH32V203F8 Breakout Alef, priced at $3.49, sits in the middle of the range with a more powerful processor running at up to 144MHz, 20kB of SRAM, and 64kB of flash. The board offers 18 DMA channels, two op-amps, two nine-channel 12-bit ADCs, two USART, one I2C, and one SPI bus, USB 2.0 Full Speed Host and Device connectivity, and 17 GPIO pins.

The new boards enter the same Polos family as the company's earlier $2.99 board based on the GigaDevice GD32V. (📷: AnalogLamb)

Finally, the Polos CH32V305 Breakout Alef uses a still-more-powerful chip, still running at up to 144MHz but with the addition of a hardware floating-point unit, a more generous 32kB of SRAM, and 128kB of flash. This top-end board, at a still-affordable $4.99, has two nine-channel DMA controllers, a single 12-bit digital-to-analog converter (DAC), two 12-bit ADCs, two USART, one I2C, one SPI, and one CAN bus, a touch-sensitive key input, eight timers, and 17 GPIO ports.

All boards are expected to begin shipping at the end of the month, AnalogLamb says, with more information and pre-orders available on the company's web store.

ghalfacree

Freelance journalist, technical author, hacker, tinkerer, erstwhile sysadmin. For hire: freelance@halfacree.co.uk.

Latest Articles