Naveen
Published © MIT

Monitoring DIY Lab Incubators via Cellular Networks

Create and keep track of an inexpensive DIY incubator with a Blues Notecard that sends data in real-time through cellular networks.

IntermediateFull instructions provided10 hours3,248
Monitoring DIY Lab Incubators via Cellular Networks

Things used in this project

Hardware components

Blues Notecard (Cellular)
Blues Notecard (Cellular)
×1
Blues Notecarrier-B
Blues Notecarrier-B
×1
Seeed XIAO RP2040
Seeed Studio Seeed XIAO RP2040
×1
Grove Shield for Seeeduino XIAO - with embedded battery management chip
Seeed Studio Grove Shield for Seeeduino XIAO - with embedded battery management chip
×1
Seeed Studio Grove - VOC and eCO2 Gas Sensor - SGP30
×1
Seeed Studio Grove - Temperature & Humidity Sensor (SHT40)
×1
SparkFun Qwiic Cable Kit
SparkFun Qwiic Cable Kit
×1

Software apps and online services

Blues Notehub.io
Blues Notehub.io
Datacake
Datacake
Arduino IDE
Arduino IDE

Story

Read more

Schematics

Connectivity Diagram

This is a high-level diagram that shows communication.

Code

Arduino Sketch

Firmware

Credits

Naveen

Naveen

49 projects • 170 followers
Bioinformatician, Researcher, Programmer, Maker, Tinkerer, Community contributor Machine Learning Tokyo

Comments