Things used in this project

Code

Particle firmware
Code to display the information from the web. This example uses the onboard RGB LED
Web script source code
Each steps of developing a web script that fetches information from an API and sends it to a Particle device on a regular schedule.

Credits

Replications

Did you replicate this project? Share it!

I made one

Love this project? Think it could be improved? Tell us what you think!

Give feedback

Comments

Similar projects you might like

MyHumidity Controlled by BME280 and Photon
Easy
  • 122
  • 2

Full instructions

Checks if humidity threshold is reached and informs the user by using Blynk/IFTTT-services with softAP integration.

What's My I2C Address?
Easy
  • 49
  • 1

The story of how to make a clock through using a LCD 1602 or LCD 2004 over I2C.

Tweeting Particle Photon
Easy
  • 29
  • 1

Full instructions

Tweet your friends with only the press of a button!

MyLight-Clock with NeoPixel Ring 12 Controlled by Photon
Easy
  • 249
  • 2

Full instructions

Read the time at night? Without glasses? Impossible? Focus on 2 light points, which will tell you the hour and the minute.

Map Your Particles!
Easy
  • 1,331
  • 20

Protip

Locate your Particle Photons, P1s and Electrons on a map without needing extra hardware. Use Ubidots or an offline map alternative

BME280 measures and displays on OLED controlled by Photon
Easy
  • 334
  • 2

Protip

I share my first steps with the sensor BME280 (temp / humi / pressure / altitude) and an OLED 128 * 64 px

ProjectsCommunitiesTopicsContestsLiveAppsBetaFree StoreBlogAdd projectSign up / Login