Things used in this project

Hardware components:
Photon new
Particle Photon
×1
SparkFun GPS Receiver - GP-735
×1
SparkFun JST SH Jumper 6 Wire Assembly
×1
SparkFun 0.66" Micro OLED Breakout
×1
SparkFun Jumper Wires - Connected 6" (M/M, 20 pack)
×1
Hand tools and fabrication machines:
09507 01
Soldering iron (generic)

Schematics

Fritzing Schematic
How to wire the OLED display and GPS
Mask bb hw

Code

Photon source code
Compile for the Photon using the Particle CLI: git clone https://github.com/monkbroc/jedi_tracker.git particle flash my_device jedi_tracker/firmware

Credits

Replications

Did you replicate this project? Share it!

Love this project? Think it could be improved? Tell us what you think!

Give feedback

Comments

Similar projects you might like

Home Automation Using Wiscore and OpenHab
Intermediate
  • 104
  • 2

Protip

This project will help you setup your very own Alexa controlled Home Appliances using the wonderful Wiscore Module from RAK Wireless.

Starry Night Prom
Intermediate
  • 1,593
  • 12

How did I stand out at prom? In a light up dress of course!

Third Eye for The Blind
Intermediate
  • 748
  • 11

Full instructions

An innovative wearable technology for visually impaired peoples.

DIY Fidget LED Display
Intermediate
  • 1,279
  • 8

Full instructions

Fidget spinners...the simple spinning toy that came out of nowhere. I thought it'd be cool give it some flare and make it a POV display.

ArduRadio AlarmClock
Intermediate
  • 1,744
  • 2

Full instructions

Build an FM radio with alarm clock.

Controlling 2 motors with Bean+ and TB6612FNG
Intermediate
  • 20
  • 1

Full instructions

This project aims to demonstrate the operation of the TB6612FNG drive together with the Bean+ to control two DC motors trough an iPhone app.

ProjectsCommunitiesTopicsContestsLiveAppsBetaFree StoreBlogAdd projectSign up / Login