Digilent
Welcome to the Digilent community! Join to share projects and receive help.

NI LabVIEW is an award-winning development environment optimized for engineers and scientists creating test, measurement, and control applications. With LabVIEW, you can quickly and easily acquire real-world signals, perform analysis to ascertain meaningful data, and communicate or store results in a variety of ways.

The LabVIEW Home bundle is offered to makers and hobbyists for non-commercial use at a greatly reduced price and includes the 32-bit version of LabVIEW Home for Windows 10/8.1/8/7/Vista/XP (32-bit and 64-bit).

GO2
Advanced
  • 233
  • 14

Work in progress

We found an app that will check the weather and give you the best travel method to go to school or work.

The user-friendly Servo motor you always hoped existed
Easy
  • 1,442
  • 9

The HDrive is an easy to use IoT-enabled servo drive, both for the inexperienced and for professionals.

Heart Rate Monitoring System
Intermediate
  • 3,393
  • 21

Full instructions

A heart rate monitoring system that tracks your heart beat in "BMP" but I made a little difference by adding some LabView Visualisations.

Sumobot's
Intermediate
  • 263
  • 4

Using LabVIEW 2014 and LINX 3.0, we created two wirelessly controlled Sumobots.

Pet Feeder
Easy
  • 2,278
  • 8

Full instructions

Pet feeder is for people who live with pet(s) to help them feed their pets when they are not at home.

DIY ECG using a Analog Discovery 2 and LabVIEW
Intermediate
  • 422
  • 3

Protip

How to make a homemade electrocardiograph (ECG).

Adding Nobs to the Analog Discovery 2 Using LabVIEW
Easy
  • 106
  • 2

Protip

In my project, I used LabVIEW to interface with 3 Pmod ENC's connected to a WF32 to control a LabVIEW project I made called LabForms.

Analog Discovery 2 USB Oscilloscope + LabVIEW
Easy
  • 310
  • 3

Protip

How to connect an Analog Discovery 2 USB Oscilloscope to LabVIEW, using LabForms 2.0.

Using a Tablet to Control a Raspberry Pi With LabVIEW
Easy
  • 465
  • 2

Full instructions

This project uses a tablet running Data Dashboard and a Raspberry Pi to wireless control a WF32 fan set up.

Alexa, Ask LabVIEW
Intermediate
  • 409
  • 2

Full instructions

Send voice controls to your LabVIEW application using the Amazon Echo.

Alexa, Ask LabVIEW

Team LabVIEW MakerHub

LINX 3.0 - 06 | Deploying A Startup Executable
Easy
  • 357
  • 2

Protip

This tutorial describes the process of creating a startup executable from a VI and deploying it to run each time the LINX device starts.

LINX 3.0 - 05 | Blink!
Easy
  • 300
  • 2

Protip

This tutorial describes the process for blinking an LED on the BeagleBone Black or Raspberry Pi 2/3 by creating a LabVIEW application.

LINX 3.0 - 05 | Blink!

Team LabVIEW MakerHub

Making Physical Touchpad Controls For Your WF32
Easy
  • 50
  • 1

Full instructions

This guide will show you how to make a physical interface for LabVIEW.

LINX 3.0 - 08 | Data Dashboard
Easy
  • 961
  • 1

Protip

Creating a LabVIEW Data Dashboard to interact with your embedded LabVIEW application from your Android or iOS tablet.

LINX 3.0 - 08 | Data Dashboard

Team LabVIEW MakerHub

LabVIEW Basics - 04 | Raspberry Pi Setup
Easy
  • 797
  • 0

Protip

This tutorial describes the process of setting up a Raspberry Pi as a LabVIEW target using LINX.

LabVIEW Basics - 05 | Dataflow
Easy
  • 65
  • 1

Protip

LabVIEW uses a Dataflow model for executing code. In LabVIEW data flow controls the program execution.

LabVIEW Basics - 05 | Dataflow

Team LabVIEW Makerhub

LINX 3.0 - 07 | Web Services
Easy
  • 434
  • 1

Protip

Create LabVIEW Web Services to provide an easy way to connected your embedded LabVIEW application to browser based GUI.

LINX 3.0 - 07 | Web Services

Team LabVIEW MakerHub

Robo-Spider
Advanced
  • 425
  • 1

A six-legged robot spider that can walk, balance and display sweet visuals on an LED array.

Robo-Spider

Team Kapek Design

LINX 3.0 - 01 | Intro
Easy
  • 409
  • 0

Protip

An introduction to LINX 3.0 which adds the ability to deploy LabVIEW code to run on BeagleBone Black and Raspberry Pi 2 and 3.

LINX 3.0 - 01 | Intro

Team LabVIEW MakerHub

LINX 3.0 - 02 | LINX Software Setup
Easy
  • 278
  • 0

Protip

This tutorial describes the process of setting up the development software (LabVIEW and LINX) on the host PC.

Using a Raspberry Pi to Control a WF32 with LabVIEW
Easy
  • 200
  • 1

Full instructions

This project allows you to control a fan and a servo over WiFi with LabVIEW.

ProjectsCommunitiesTopicsContestsLiveAppsBetaFree StoreBlogAdd projectSign up / Login
Feedback