Danica Fernandez
Published © CC BY-NC-SA

Ecofill - Reuse and Refill Bottles on This Vending Machine

Reduce waste and save some bucks refilling your bottles with cleaning products from Ecofill vending machine. It's easy to save the planet!

ExpertFull instructions providedOver 1 day1,744

Things used in this project

Hardware components

Proximity Sensor- Pyroelectric Infrared Sensor Module
KEMET Electronics Corporation Proximity Sensor- Pyroelectric Infrared Sensor Module
×1
KEMET Electronics Corporation CT-07-1000
×1
SkyKontrol Modules (available in project GitHub)
×1
Coin Acceptor (Multi Coin, pulse interface)
×1
HTS-40F-12 Power Supply (12V@3.5A)
×1
High Flow Peristaltic Pump
×4
Transformer 127Vac to 24 Vac
×1
Push Button - Panel Mount (Normally Open)
×5
Led Lamp 24Vac - Panel Mount
×1

Software apps and online services

Web Server (LAMP)
Arduino IDE
Arduino IDE
MPLAB X IDE
Microchip Technology MPLAB X IDE

Story

Read more

Schematics

IoT Controller

This is the schematic for the main control module.

Power Meter

This is the schematic for the power meter module.

Smart Display

This is the schematic for the smart display module.

Slot Expansion

This is the schematic for the slot expansion module.

Datalogger

This is the schematic for the datalogger module.

Level Sensor

This is the schematic for the level sensor module.

Code

SkyKontrol Hardware and Software

This is are the circuit boards, firmware and web platform used for EcoFill vending machine.

Credits

Danica Fernandez

Danica Fernandez

5 projects • 14 followers
I am a trans girl who likes to make robots, program and get messy with electronics. I am the queen of embedded systems ;)

Comments