Camille Vargas
Published © GPL3+

Build a Connected Arduino Light

This tutorial will walk through the process of building a simple, connected light using an Arduino Mkr Wifi 1010 and Yonomi ThinCloud.

BeginnerShowcase (no instructions)2 hours799

Things used in this project

Hardware components

Arduino MKR WiFi 1010
Arduino MKR WiFi 1010
×1
Standard, 4-wire micro-USB data cable
×1
Breadboard (generic)
Breadboard (generic)
×1
5 mm LED: Yellow
5 mm LED: Yellow
×1
Tactile Switch
×1
Resistor 220 ohm
Resistor 220 ohm
×1
Resistor 10k ohm
Resistor 10k ohm
×1
Jumper wires (generic)
Jumper wires (generic)
×6

Software apps and online services

Arduino IDE
Arduino IDE
MQTTbox
Postman
Yonomi ThinCloud
Yonomi ThinCloud

Story

Read more

Schematics

Yonomi Simple Button Light Device Schematic

Credits

Wilson Hughes

Posted by Camille Vargas
Thanks to Wilson Hughes .

Comments