Alert and Rescue System

#include <BoltIoT-Arduino-Helper.h>
int s=2;
void setup() {
  boltiot.begin(3,4); //Initialize the Bolt interface over software serial UART.
       //In this example, the TX pin of Bolt is connected to pin 3 of Arduino
       //and the RX pin of Bolt is connected to pin 4 of Arduino
  pinMode(s,INPUT);//Set pin 2 as the input. We will use send this pin's state as the data to the Bolt cloud
Serial.begin(9600);

}

void loop() {
long v = pulseIn (s, HIGH);
delay(1000);
Serial.println(v);
boltiot.processPushDataCommand(v);
  //Send data to the Bolt cloud, when the Bolt polls the Arduino for data.
/*This function nee1ds to be called regularly. Calling the processPushDataCommand function once every second is required*/

}