Youssef Sabaadomirat271
Published

Untitled

This project will show you how to make a wireless upload Arduino code from your Computer via Bluetooth.

IntermediateFull instructions provided46,139
Untitled

Things used in this project

Hardware components

HC-05 Bluetooth Module
HC-05 Bluetooth Module
×1
Resistor 2.21k ohm
Resistor 2.21k ohm
×1
Resistor 10k ohm
Resistor 10k ohm
×1
resistor 15K
×1
100nf capacitor
×1
Arduino UNO & Genuino UNO
Arduino UNO & Genuino UNO
×1
prototyping shield
×1
laptop
×1
Bluetooth
×1

Software apps and online services

Arduino IDE
Arduino IDE

Hand tools and fabrication machines

Soldering iron (generic)
Soldering iron (generic)

Story

Read more

Schematics

This is the circuit after changing the command on the bluetooth module with the arduino

Build the programmer circuit onto the prototyping shield.
Solder on a female header for the Bluetooth module if you want to be able to easily remove it later.

Pin 32

connect the pin 32 like the circuit diagramme with the arduino

bt_shield_circuit3.png

Code

serialloop.zip

C/C++
No preview (download only).

Credits

Youssef Sabaa

Youssef Sabaa

5 projects • 38 followers
domirat271

domirat271

0 projects • 0 followers

Comments