Tessel
Welcome to the Tessel community! Join to share projects and receive help.

The Relay Module can control high-current devices, such as power cords and appliances. It is rated for 240V and 5A, AC or DC current. The wire connectors can secure and remove wires with the help of a ballpoint pen. No more loose wires or screwdrivers. It uses the IM02DGR for switching.

Modular Smart-Home IoT Node
Advanced
  • 3,667
  • 19

Plug n Place: Plug your sensor and re-station it for a new application.

MannyBot365
Intermediate
  • 2,223
  • 26

Home automation system.

MannyBot365

3 members

BLE Proximity-based Switch
  • 7,253
  • 11

Full instructions

Switches on a relay when BLE device is in range

IOT Home Automation (Node MCU + BLYNK)
Intermediate
  • 3,679
  • 9

Control home appliances over internet. This IOT project done using Node MCU ESP8266 and BLYNK app. Control devices from anywhere.

Website Down Alarm
  • 3,678
  • 18

Full instructions

Pings a URL and causes an alarm light to flash if the status code is not 200.

Water Pump Controller
Intermediate
  • 5,482
  • 12

Full instructions

Controlling water pump using on and off buttons.

Chameleon Monitoring System
Intermediate
  • 278
  • 4

Full instructions

Monitor temperature, UV index, pump status on misting system and drain level for my chameleon's terrarium to promote good health.

Control your home devices using GLCD and Voice Recognition
Intermediate
  • 1,478
  • 5

Work in progress

Control your home devices using some button on the GLCD and using Voice Recognition

Tessel Clap-Switch
Easy
  • 1,315
  • 4

Full instructions

Tessel listens for a clap, then toggles a relay to turn something on and off.

Make it Rain
  • 950
  • 2

Full instructions

Keep your plant alive from your cell phone.

Make it Rain

bdettmer

Fish Feeder and Watering System
Intermediate
  • 345
  • 4

Work in progress

Use Express.js interface to feed the fish and water the plants while we are away on holidays.

Motion Controlled Lamp With A Tessel – Start Your Robot
Easy
  • 502
  • 2

Full instructions

Walk in the room and the light turns on. Walk out and after a delay it turns off.

The running bug
Easy
  • 475
  • 3

The bug toy is running when it detected by near-infrared sensors.

Tessel Greenhouse
  • 1,294
  • 2

Full instructions

An API for monitoring and managing a greenhouse over the web with a Tessel.io

GPRS Trigger
  • 758
  • 0

Full instructions

Use your Tessel's GPRS module to trigger actions

GPRS Trigger

@paigereads

Simple Remote Switch
Intermediate
  • 731
  • 1

Full instructions

Uses IR signal to latch/unlatch a relay

tessel-nfl
  • 513
  • 1

Full instructions

A script for the tessel that uses the NFL's ScoreScript JSON feed to check the scores for a specific game, and trigger an attached relay.

tessel-nfl

@markshust

How to Make LAN/Ethernet Relay Switch Using Arduino UNO
Easy
  • 483
  • 0

Protip

How to make LAN/Ethernet relay switch using Arduino UNO and ethernet shield ENC28j60.

Wireless Outlet Controller
Intermediate
  • 153
  • 1

Full instructions

This is a controller that makes 3 connections wireless.

Tessel Garage Door Controller
Easy
  • 145
  • 1

Full instructions

Garage door controller built with the open Tessel hardware platform. The device hosts the web app used to control the door.

ProjectsCommunitiesTopicsContestsLiveAppsBetaFree StoreBlogAdd projectSign up / Login