The key thing when working with robots is safety. This project shows how we can use LIDAR to stop a robot arms movement if things get close.
The Temperature Card is a wearable XIAO and SSD1306-based device that displays the current temperature using an SHT40 sensor.
A medical student's review of the myCobot 320: unboxing, performance testing, and insights into upgrading from the myCobot 280.
SIM900A GSM Module & Arduino: Sending/Receiving SMS & Making Calls Using AT Commands.
Controlled DC motor by Raspberry Pi and DRV8833
An Nvidia Jetson Nano computer vision project with TensorRT acceleration, to perform counting for manufacturing quality control.
Based on Mobile Aloha, AgileX developed Cobot Magic, which can achieve the complete code of Mobile Aloha.
A small handy pocket TEMP Meter made from ESP32C3 driven MCU paired with an SSD1306 128x32-pixel screen, AHT10 is being used to take TEMP.
Restoring the path of a moving object, speed, date, time and map in Google Earth, data recorded on an SD card
First Glimpse at PoE Ethernet for DIY IoT Projects.
The device that converts digital input into (0-24mA) current output accurately.
We have compiled some of the most influential cases in 2023 to share here.
AgileX Cobot Magic is a system based on Mobile ALOHA that can simultaneously remotely control the TRACER mobile base and robotic arms.
Made a Raspberry Pi Pico powered DC 12V-5V FAN Driver
PC Pi is getting faster and cheaper again! A mini PC+USB GPIO port board or PC+USB development board cost about the same as Raspberry Pi 5!
Following the previous article, let’s further explore the integration project between LIMO Pro and myCobot.
In this article, we'll delve into the exciting realm of simulating a garage door opener using Arduino.
Experience the Arduino All-in-One Robot, equipped with Bluetooth, IR remote, voice control, obstacle avoidance, and hand follower.
In this article, I will teach you everything you need to start designing your own custom ESP32 microcontrollers for your projects.
Implementing proper waste management in home, locality and city.
These ST-Link dongles looks like JTAG or AVR programmers. You have to read the labels. Let's setup to program STM32 ARM chips using SWD.
Revolutionize playtime with my Raspberry Pi-powered Ball Tracking Robot. Explore the future of interactive robotics in this DIY project
Differential drive robot using ROS2, micro-ROS and ESP32
Today I done blinking of led in STM32F401CE