Turn Motor ON/OFF With Your Phone Through Miss-Call! Arduino 4G LTE Module Automation.
How to Place Calls from A9G Board by Sending AT Commands from Raspberry Pi Pico W
In this tutorial you will learn how to send sms with Temperature and Humidity data using the SIM900 GSM Shield, DHT11 sensor and Visuino.
How to use Python to Place a Calls from A9G(GSM/GPRS + GPS) Module
How to Integrate Python with A9G Module to Send Dynamic or Predefined SMS to Any Number
How to Send SMS from A9G Board by Sending AT Commands from Raspberry Pi Pico W using MicroPython Programming
How to Send SMS from A9G Board by Sending AT Commands from Ai Thinker Serial Tool
Establishing MQTT Communication with A9G Board Using Ai-Thinker Serial Tool
In this tutorial you will learn how to send sms using the SIM900 GSM Shield and Visuino. Watch the Video!
How to Place Calls from A9G Board by Sending AT Commands from Ai Thinker Serial Tool
This is a replica of PayTM Pocket sound box which you can make on your own using XIAO ESP32C3, SIM800 module and couple other components.
How to Flash AT Command Firmware in A9G(GSM/GPRS+GPS/BDS) Board
How to Use A9G Board to Subscribe to MQTT Topics and Receive Messages Using Ai-Thinker Serial Tool
My lightweight Arduino GSM mobile phone.
This can hep you to access your home when you are out . You can switch on and off the home appliances from anywhere.
Track ME is a "small" GPS, SD Card, and GSM Shield controlled by an Arduino Mega. Call me and get my location.
In this tutorial, you are going to learn how to make a vehicle tracking system using GPS and Arduino.
GSM Home Alarm using a Ultrasonic sensor to detect movement and inform the User of intrusion.
Looking for a 3.3V capable NB-IOT board, I came across the SIM7020E. This is the journey to make it work.
New to LinkIt ONE? Here's a simple, practical project that will get you off to a running start.
Send and Receive Text Messages (SMS) with GSM SIM900 Shield from Seeed Studio - Quick and Easy!
Poseidon is a cheap wireless water level controller for overhead tanks made using Arduino UNO and HC-12 wireless communication module.
Demonstration program on how to drive a SIM7020 NB-IoT modem, then set up a dashboard using T-Mobile's network and AllThingsTalk API.
Development platform for PlatformIO - Arduino, OpenCPU, ThreadX